Using industrial solid waste carbide slag as calcium source
novel composite particles were prepared by adding circulating fluidized bed (CFB) fly ash and cement for modification and coupling with curing process. Results show that the high content of CaO in carbide slag provides a strong alkali environment for the system
and a large number of hydration products such as C-S-H gel and ettringite are generated in the hydration process of the optimal ratio group. The strength of the sample after 28 days of curing reaches 4.619 MPa
which is about 109% higher than that of 1 day curing. The initial CO2 adsorption capacity of the composite particles reaches 0.34 g/g
and at 850 ℃
the CO2 adsorption capacity only decreases by 31.5% after 16 cycles. The adsorption isotherm conforms to double exponential model
and the kinetic data conforms to quasi-second-order model
indicating that the adsorption process is controlled by chemical bonding.
关键词
Keywords
references
LAURENT L, BUONCRISTIANI J F, POHL B, et al. The impact of climate change and glacier mass loss on the hydrology in the Mont-Blanc massif[J]. Scientific Reports, 2020, 10(1): 10420.
CHEN Siyuan, LIU Jiangfeng, ZHANG Qi, et al. A critical review on deployment planning and risk analysis of carbon capture, utilization, and storage (CCUS) toward carbon neutrality[J]. Renewable and Sustainable Energy Reviews, 2022, 167: 112537.
ZHOU Zhihao, DENG Guoshu, LI Lin, et al. Chemical looping co-conversion of CH4 and CO2 using Fe2O3/Al2O3 pellets as both oxygen carrier and catalyst in a fluidized bed reactor[J]. Chemical Engineering Journal, 2022, 428: 132133.
潘怡, 刘敦禹, 金晶. CaO/CaCO3储能系统材料设计研究进展[J]. 动力工程学报, 2024, 44(5): 770-781.PAN Yi, LIU Dunyu, JIN Jing. Research progress on material design of CaO/CaCO3 energy storage system[J]. Journal of Chinese Society of Power Engineering, 2024, 44(5): 770-781.
张媛, 韩龙, 林康, 等. 新型钙基吸收剂捕集CO2和脱除焦油的研究[J]. 动力工程学报, 2018, 38(7): 578-586.ZHANG Yuan, HAN Long, LIN Kang, et al. Study on CO2 capture and tar removal characteristics of a newly developed Ca-based sorbent[J]. Journal of Chinese Society of Power Engineering, 2018, 38(7): 578-586.
戴文浩, 王春波, 陈亮, 等. H2O和SO2对钙循环捕集CO2碳酸化过程协同效应的研究[J]. 动力工程学报, 2022, 42(8): 784-792.DAI Wenhao, WANG Chunbo, CHEN Liang, et al. Study on synergistic effect of H2O and SO2 during carbonation on CO2 capture in calcium looping cycle[J]. Journal of Chinese Society of Power Engineering, 2022, 42(8): 784-792.
ZHANG Zhiwei, QIAN Jueshi, YOU Chao, et al. Use of circulating fluidized bed combustion fly ash and slag in autoclaved brick[J]. Construction and Building Materials, 2012, 35: 109-116.
MANOVIC V, ANTHONY E J. Thermal activation of CaO-based sorbent and self-reactivation during CO2 capture looping cycles[J]. Environmental Science & Technology, 2008, 42(11): 4170-4174.
吴岩, 荣鼐, 韩龙, 等. 纤维素模板改性钙基CO2吸附剂的蒸汽水合活化[J]. 环境工程, 2024, 42(5): 163-171.WU Yan, RONG Nai, HAN Long, et al. Steam hydration activation of cellulose template modified Ca-based CO2 sorbent[J]. Environmental Engineering, 2024, 42(5): 163-171.
HU Yingchao, LIU Wenqiang, CHEN Hongqiang, et al. Screening of inert solid supports for CaO-based sorbents for high temperature CO2 capture[J]. Fuel, 2016, 181: 199-206.
万宗华, 张文芹, 刘志超, 等. 电石渣-矿渣复合胶凝材料性能研究[J]. 硅酸盐通报, 2022, 41(5): 1704-1714.WAN Zonghua, ZHANG Wenqin, LIU Zhichao, et al. Properties of carbide slag-slag composite cementitious material[J]. Bulletin of the Chinese Ceramic society, 2022, 41(5): 1704-1714.
DU Jiang, LIU Zhuo, CHRISTOS C, et al. Utilization of off-specification fly ash in preparing ultra-high-performance concrete(UHPC): mixture design, characterization, and life-cycle assessment[J]. Resources, Conservation and Recycling, 2022, 180: 106136.
YU Ping, KIRKPATRICK R J, POE B, et al. Structure of calcium silicate hydrate (C-S-H): near-, mid-, and far-infrared spectroscopy[J]. Journal of the American Ceramic Society, 1999, 82(3): 742-748.
HIREMATH P N, YARAGAL S C. Effect of different curing regimes and durations on early strength development of reactive powder concrete[J]. Construction and Building Materials, 2017, 154: 72-87.
HUSEM M, GOZUTOK S. The effects of low temperature curing on the compressive strength of ordinary and high performance concrete[J]. Construction and Building Materials, 2005, 19(1): 49-53.
REN Ke, MA Suxia, FENG Yuchao, et al. Study on the composite gravel preparation and the synergistic absorption of CO2 by fly ash of CFB boiler[J]. Fuel, 2023, 342: 127843.
LIU Qiang, LIU Weizao, HU Jinpeng, et al. Energy-efficient mineral carbonation of blast furnace slag with high value-added products[J]. Journal of Cleaner Production, 2018, 197(1): 242-252.
YANG Yuandong, CHEN Qianjun, LIU Wenqiang, et al. Mineral-derived Li4SiO4-based adsorbent for post-combustion CO2 capture: an experimental and kinetic investigation[J]. Proceedings of the Combustion Institute, 2021, 38(4): 5339-5346.
DUAN Wenjun, HAN Jiachen, YANG Shuo, et al. Understanding CO2 adsorption in layered double oxides synthesized by slag through kinetic and modelling techniques[J]. Energy, 2024, 297: 131303.
Thermodynamic Performance Analysis of Membrane Absorption CO2 Capture System for Coal-fired Power Plants
Dual-tower Coupling Process and Parameter Optimization for CO2 Capture Using the Alkanol Amine Method
Middle-Low-temperature Flue Gas Arsenic Removal and Sulfur Resistance Performance of FeCeLaO/Fly Ash-based SiO2-Al2O3
Optimization of Variable Load Rate for Coal-fired Units Based on AM-RFR-PSO Hybrid Algorithm
Numerical Simulation Study of Pulse-type Hood Technology for Large CFB Boiler
Related Author
LI Zhaohao
GAO Dan
CHEN Haiping
ZHANG Heng
HUANG Jiguang
MENG Xianglong
HE Di
GU Jiaxin
Related Institution
School of Mechanical and Automotive Engineering, Xiamen University of Technology
Fujian Province Key Laboratory of Green Intelligent Cleaning Technology and Equipment
Hebei Key Laboratory of Low Carbon and High Efficiency Power Generation Technology, Department of Power Engineering, North China Electric Power University
China Urban Construction Design & Research Institute
Beijing Key Laboratory of Pollutant Monitoring and Control in Thermoelectric Production Process, North China Electric Power University