The supercritical carbon dioxide power cycle exhibits performance advantages when operating under high-temperature conditions
and it has a good temperature matching with tower-type solar heat collection systems. The heat transfer and mechanical performances of the solar receiver during high-temperature operation directly affect the operational safety of the entire system. Therefore
ANSYS Fluent and ANSYS Mechanical software was used to investigate the thermal-mechanical performances of the solar receiver. Firstly
the influence of heat flux density distribution on the thermal-mechanical performances of the heat-collecting tube bundle was analyzed. Secondly
the tubes with poor performance in the circular tube bundle were replaced with enhanced tubes
and a comprehensive performance analysis was conducted on different types of tube bundles. Finally
the effects of different replacement schemes on the tube bundle performance were studied. The results show that: compared with the circular tube bundle
the total entropy generation of the internally ribbed tube bundle is reduced by 11.5% and the overall heat loss is reduced by 4.5%
while the equivalent stress of No.6 and No.12 tubes after replacement is reduced by 14.9%. The 5-6-7-11-12-13 tube bundle achieves the optimal comprehensive performance—its total entropy generation is reduced by 44.7%
the overall heat loss is reduced by 25.2% compared with the circular tube bundle
and the maximum equivalent stress is lower than that of the circular tube bundle. This study provides a theoretical basis for the design and optimization of solar cavity receivers.
关键词
Keywords
references
王志峰, 杜凤丽. 2015~2022年中国太阳能热发电发展情景分析及预测[J]. 太阳能, 2019(11): 5-10, 69.WANG Zhifeng, DU Fengli. Scenario analysis and forecast of China's solar thermal power generation from 2015 to 2022[J]. Solar Energy, 2019(11): 5-10, 69.
ZHANG Hongfei, SHI Lingfeng, WANG Xuan, et al. Heat transfer characteristics of supercritical CO2 in horizontal rectangular microchannels[J]. Applied Thermal Engineering, 2023, 220: 119727.
葛学利, 张忠孝, 商显耀, 等. 镍基合金管中CO2工质700℃超临界传热特性实验研究[J]. 动力工程学报, 2018, 38(2): 138-144.GE Xueli, ZHANG Zhongxiao, SHANG Xianyao, et al. Experimental study on heat-transfer characteristics of supercritical CO2 fluid in nickel-based alloy tubes at 700℃[J]. Journal of Chinese Society of Power Engineering, 2018, 38(2): 138-144.
LIU Xiaokai, GUO Jiangfeng, HAN Zengxiao, et al. Studies on thermal-hydraulic characteristics of supercritical CO2 flows with non-uniform heat flux in a tubular solar receiver[J]. Renewable Energy, 2022, 201: 291-304.
董新宇, 张宇轩, 刘璐, 等. 加热条件下倾斜管中超临界CO2流动与传热特性数值模拟[J]. 动力工程学报, 2024, 44(10): 1503-1514.DONG Xinyu, ZHANG Yuxuan, LIU Lu, et al. Numerical simulation of flow and heat transfer characteristics of supercritical CO2 in inclined tube under heating condition[J]. Journal of Chinese Society of Power Engineering, 2024, 44(10): 1503-1514.
YANG Zenan, CHEN Wei, CHYU M K. Numerical study on the heat transfer enhancement of supercritical CO2 in vertical ribbed tubes[J]. Applied Thermal Engineering, 2018, 145: 705-715.
GAO Shuo, WANG Yanjuan, LI Yi, et al. Performance analysis of sCO2 tube with high non-uniform heat flux: thermal-fluid-structural evaluation and optimization[J]. Applied Thermal Engineering, 2023, 231: 120849.
WANG Yanjuan, GAO Shuo, SHI Weijie, et al. A novel structure tube for supercritical CO2 turbulent flow with high non-uniform heat flux[J]. International Journal of Heat and Mass Transfer, 2023, 213: 124292.
PREZ-LVAREZ R, MONTOYA A, LPEZ-PUENTE J, et al. Solar power tower plants with bimetallic receiver tubes: a thermomechanical study of two- and three-layer composite tubes configurations[J]. Energy, 2023, 283: 129170.
ORTEGA J, KHIVSARA S, CHRISTIAN J, et al. Coupled modeling of a directly heated tubular solar receiver for supercritical carbon dioxide Brayton cycle: structural and creep-fatigue evaluation[J]. Applied Thermal Engineering, 2016, 109: 979-987.
石硕, 庄晓如, 徐心海. 太阳能吸热器内超临界二氧化碳对流换热特性数值研究[J]. 热力发电, 2020, 49(10): 87-92.SHI Shuo, ZHUANG Xiaoru, XU Xinhai. Numerical simulation of convection heat transfer characteristics of supercritical carbon dioxide in a concentrating solar power receiver[J]. Thermal Power Generation, 2020, 49(10): 87-92.
HAO Yun, WANG Yueshe, HU Tian. The flow distribution in the parallel tubes of the cavity receiver under variable heat flux[J]. Applied Thermal Engineering, 2016, 108: 641-649.
肖博, 王碧辉, 岑栋梁, 等. 镍基合金Inconel 617在高温超临界CO2下的腐蚀特性研究[J]. 动力工程学报, 2023, 43(4): 406-413.XIAO Bo, WANG Bihui, CEN Dongliang, et al. Study on corrosion characteristics of nickel-based alloy inconel 617 in high-temperature supercritical carbon dioxide[J]. Journal of Chinese Society of Power Engineering, 2023, 43(4): 406-413.
梁志远, 桂雍, 赵钦新. 超临界CO2动力循环高温材料腐蚀研究进展[J]. 动力工程学报, 2021, 41(11): 910-917.LIANG Zhiyuan, GUI Yong, ZHAO Qinxin. Research progress on corrosion of high-temperature materials in supercritical CO2 power cycle[J]. Journal of Chinese Society of Power Engineering, 2021, 41(11): 910-917.
SIEBERS D L, KRAABEL J S. Estimating convective energy losses from solar central receivers[R]. Livermore: Sandia National Laboratories, 1984.
LI X L, LI G X, TANG G H, et al. A generalized thermal deviation factor to evaluate the comprehensive stress of tubes under non-uniform heating[J]. Energy, 2023, 263: 125710.
MENTER F R. Two-equation eddy-viscosity turbulence models for engineering applications[J]. Aiaa Journal, 1994, 32(8): 1598-1605.
ZHANG Haiyan, GUO Jiangfeng, CUI Xinying, et al. Heat transfer performance of supercritical pressure CO2 in a non-uniformly heated horizontal tube[J]. International Journal of Heat and Mass Transfer, 2020, 155: 119748.
谢雄州, 叶道铭, 黄俊辉, 等. 湍流普朗特数模型对水平圆管内sCO2传热预测的影响[J]. 动力工程学报, 2023, 43(12): 1539-1548.XIE Xiongzhou, YE Daoming, HUANG Junhui, et al. Influences of turbulent Prandtl number models on predicting sCO2 heat transfer in horizontal circular tubes[J]. Journal of Chinese Society of Power Engineering, 2023, 43(12): 1539-1548.
WANG Kun, ZHANG Zhendong, LI Mingjia, et al. A coupled optical-thermal-fluid-mechanical analysis of parabolic trough solar receivers using supercritical CO2 as heat transfer fluid[J]. Applied Thermal Engineering, 2021, 183: 116154.
朱兵国. 超临界二氧化碳垂直管内对流换热研究[D]. 北京: 华北电力大学, 2020.
NEISES T W, WAGNER M J, GRAY A K, et al. Structural design considerations for tubular power tower receivers operating at 650℃[C]//Proceedings of the ASME 8th International Conference on Energy Sustainability. Boston: ASME, 2014.
WANG Wei, FU Kang, ZHANG Yaning, et al. Entropy study on the enhanced heat transfer mechanism of the coupling of detached and spiral vortex fields in spirally corrugated tubes[J]. Heat Transfer Engineering, 2021, 42(17): 1417-1431.
Dual-channel Short-term Wind Power Forecasting Fusing Long- and Short-term Dependencies
Double-layer Coordination Economic and Real-time Dispatching Strategy for Large-scale Energy Base
Leckner Model-based Analysis of Ammonia-Coal Co-firing: Effect of High H2O Concentration Flue Gas on Heat Transfer Characteristics in Coal-fired Boilers
Research on Optimal Scheduling Method for Source-Grid- Load-Storage Systems Considering Electro-Thermal Load Demands in Industrial Parks
Research on Reconstruction of Two-dimensional Temperature Field and H2O Concentration Field Based on TDLAS
Related Author
LI Peng
BAI Yaping
GUO Dongyang
HAN Zhonghe
CHEN Dongxu
GUO Tingshan
GUI Yong
LIANG Zhiyuan
Related Institution
Hebei Key Laboratory of Low Carbon and High Efficiency Power Generation Technology, North China Electric Power University
Department of Power Engineering, North China Electric Power University
MOE Key Laboratory of Thermo-Fluid Science and Engineering, Xi'an Jiaotong University
Harbin Boiler Company Limited
Shanghai Power Equipment Research Institute Co., Ltd.