To address the issues of central air duct wear and poor low-load combustion stability performance present in the new type of low-NO
x
axial swirl burner (the burner before optimization is referred to as the original burner)
the central air structure of the burner was eliminated (the burner after optimization is referred to as the optimized burner). Laboratory 1∶4 cold-state single-phase modeling experiments were conducted on above two types of burners to investigate the impact of the presence or absence of the central air structure on the outlet flow field of the burner. Meanwhile
industrial experiments were carried out on a 350 MW opposed-firing boiler burning
bituminous coal that employed these two types of burners. Results show that both the original burner and the optimized burner form an annular recirculation zone at the burner outlet
while the recirculation zone area of the optimized burner is larger. The height of the recirculation zone increases from 0.07 m (0.2
d
where
d
is the flared diameter of the outer secondary air) to 0.1 m (0.28
d
)
representing a 43% increase in height. The ignition distance of the optimized burner is approximately 1 m
while that of the original burner is approximately 1.15 m. The optimized burner experiences earlier ignition
with O
2
content decreasing and CO being generated earlier and faster.
谢召祥, 凌鹏, 湛芳, 等. 分离燃尽风对贫煤锅炉CO和H 2 S生成特性的影响[J ] . 动力工程学报, 2021, 41(9):729-735.XIE Zhaoxiang, LING Peng,ZHAN Fang, et al. Influence of separated over fire air on CO and H 2 S formation characteristic of a lean coal-fired boiler[J ] . Journal of Chinese Society of Power Engineering, 2021, 41(9):729-735.
宋民航, 黄云, 黄骞, 等. 旋流煤粉燃烧器低负荷稳燃技术探讨[J]. 中国电机工程学报, 2021, 41(13):4552-4565.SONG Minhang, HUANG Yun, HUANG Qian, et al. Discussion on low-load stable combustion technology of swirl pulverized-coal burner[J]. Proceedings of the CSEE, 2021, 41(13):4552-4565.
舒健. 浅谈燃煤锅炉低负荷运行的稳燃措施[J]. 低碳世界, 2020, 10(1):95-96.SHU Jian. Brief discussion on measures for stabilizing combustion in low load operation of coal-fired boilers[J]. Low Carbon World, 2020, 10(1):95-96.
马达夫, 何翔, 张守玉, 等. 燃用混煤的1000 MW旋流对冲锅炉宽负荷稳燃特性研究[J]. 动力工程学报, 2021, 41(12):1019-1026.MA Dafu, HE Xiang, ZHANG Shouyu, et al. Study on combustion stability of a 1000 MW swirl-opposed boiler with blending coal under wide load[J]. Journal of Chinese Society of Power Engineering, 2021, 41(12):1019-1026.
吕为智, 赵旭, 何翔, 等. 燃煤机组灵活性改造后燃烧优化试验研究[J]. 动力工程学报, 2023, 43(11):1406-1412.LV Weizhi, ZHAO Xu, HE Xiang, et al. Experimental study on combustion optimization of coal-fired unit after flexible modification[J]. Journal of Chinese Society of Power Engineering, 2023, 43(11):1406-1412.
SU Xianqiang, FANG Qingyan, MA Lun, et al. Improving combustion and lowering NO x emissions of an industrial coal swirl burner by optimizing its nozzle structure[J ] . Applied Thermal Engineering, 2023, 218:119340.
ZHOU Hao, YANG Yu, LIU Haize, et al. Numerical s imulation of the combustion characteristics of a low NO x swirl burner:influence of the primary air pipe[J ] . Fuel, 2014, 130:168-176.
LI Zhengqi, JING Jianping, CHEN Zhichao, et al. Combustion characteristics and NO x emissions of two kinds of swirl burners in a 300-MW e wall-fired pulverized-coal utility boiler[J ] . Combustion Science and Technology, 2008, 180(7):1370-1394.
TI Shuguang, CHEN Zhichao, LI Zhengqi, et al. Effect of outer secondary air vane angles on combustion characteristics and NO x emissions for centrally fuel rich swirl burner in a 600-MWe wall-fired pulverized-coal utility boiler[J ] . Applied Thermal Engineering, 2017, 125:951-962.
王慧青, 罗睿, 周屈兰, 等. 一种新型旋流燃烧器的工作特性研究[J]. 动力工程学报, 2011, 31(7):491-496, 506.WANG Huiqing, LUO Rui, ZHOU Qulan,et al. Study on operation performance of a new swirl burner[J]. Journal of Chinese Society of Power Engineering, 2011, 31(7):491-496, 506.
ZENG Lingyan, LI Zhengqi, ZHAO Guangbo, et al. Effect of the vane angle for outer secondary air on the flow and combustion characteristics and NO x emissions of the low-NO x axial-swirl coal burner[J ] . Numerical Heat Transfer, Part A:Applications, 2011, 59(1):43-57.
LI Zhengqi, KUANG Min, ZHU Qunyi, et al. Aerodynamic characteristics within a cold small-scale model for a down-fired 350 MW e utility boiler applying a multiple-injection and multiple-staging technology:effect of the staged-air declination angle[J ] . Experimental Thermal and Fluid Science, 2012, 38:184-194.
CHEN Zhichao, LI Zhengqi, JING Jianping, et al. Study on flow fields of centrally fuel rich swirl burner and its applications[J]. Korean Journal of Chemical Engineering, 2009, 26(5):1186-1193.
MVLLER U R. On the accuracy of turbulence measurements with inclined hot wires[J]. Journal of Fluid Mechanics, 1982, 119:155-172.
LI Song, LI Zhengqi, JIANG Bingkun, et al. Effect of secondary air mass flow rate on the airflow and combustion characteristics and NO x formation of the low-volatile coal-fired swirl burner[J ] . Asia-Pacific Journal of Chemical Engineering, 2015, 10(6):858-875.