王威, 张贵泉, 吴志军, et al. Experimental study on deposition law of corrosion products in throttle orifice of steam generator in high temperature gas cooled reactor[J]. Thermal Power Generation, 2025, (11): 91-97.
DOI:
王威, 张贵泉, 吴志军, et al. Experimental study on deposition law of corrosion products in throttle orifice of steam generator in high temperature gas cooled reactor[J]. Thermal Power Generation, 2025, (11): 91-97. DOI: 10.19666/j.rlfd.202502037.
Experimental study on deposition law of corrosion products in throttle orifice of steam generator in high temperature gas cooled reactor
邵天佑,闻国华.直流锅炉水冷壁节流孔板磁性氧化铁沉积探讨[J].华电技术, 2009, 31(6):45-47.SHAO Tianyou, WEN Guohua. Investigation on magnetic oxide iron deposition of throttle orifice plate in oncethrough boiler waterwall[J]. Huadian Technology, 2009,31(6):45-47.
邵天佑.超超临界机组锅炉水冷壁节流孔板结垢的处理[J].热力发电, 2010, 39(3):75-77.SHAO Tianyou. Scaling on throttle plate of the water-wall in boiler for ultra-supercritical unit and disposal thereof[J]. Thermal Power Generation, 2010, 39(3):75-77.
刘玉海.超超临界机组直流锅炉水冷壁节流孔圈结垢堵塞超温防范对策[J].广东电力, 2012, 25(7):110-113.LIU Yuhai. Countermeasures against superheat due to fouling blocked throttling orifice of water wall of concurrent boiler in ultra supercritical units[J].Guangdong Electric Power, 2012, 25(7):110-113.
张丽霞,冯朝晖.超超临界锅炉管道事故及原因分析[J].武汉大学学报, 2011, 44(2):261-265.ZHANG Lixia, FENG Chaohui. Pipeline materials selection and cause analysis of accidents in pipeline for ultra supercritical boiler[J]. Engineering Journal of Wuhan University, 2011, 44(2):261-265.
HENSHAW J, MCGURK J C, SIMS H E, et al. A model of chemistry and thermal hydraulics in PWR fuel crud deposits[J]. Journal of Nuclear Materials, 2006, 353:1-11.
CIONCOLINI A, SCENINI F, DUFF J. Micro-orifice single-phase liquid flow:pressure drop measurements and prediction[J]. Experimental Thermal&Fluid Science,2015, 65:33-40.
HOLDSWORTH S, SCENINI F, BURKE M G, et al. The effect of high-temperature water chemistry and dissolved zinc on the cobalt incorporation on type 316 stainless steel oxide[J]. Corrosion Science, 2018, 140:241-251.
YANG G, POINTEAU V, TEVISSEN E, et al. A review on clogging of recirculating steam generators in pressurized-water reactors[J]. Progress in Nuclear Energy,2017, 97:182-196.
J MCGRADY, F SCENINI, J DUFF, et al. Investigation into the effect of water chemistry on corrosion product formation in areas of accelerated flow[J]. Journal of Nuclear Materials, 2017, 493:271-279.
MCGRADY J, DUFF J, STEVENS N, et al. Development of a microfluidic setup to study the corrosion product deposition in accelerated flow regions[J]. Nature Partner Journals, 2017, 21:1-9.
MAX S, STEFANO C, ANDREA C, et al. CRUD removal via hydrodynamic cavitation in micro-orifices[J]. Nuclear Engineering and Design, 2019, 343:210-217.
CASSINERI S, DUFF J, CURIONI M, et al. Scenini,CRUD deposition in accelerated high-temperature water:investigation on the effect of substrate material and water chemistry[J]. Journal of Nuclear Materials, 2020, 529:151915-151926.
CASSINERI J, DUFF M, CURIONI A, et al. The influence of metal substrate on CRUD build-up under simulated PWR conditions[C]. International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors. Boston USA, 2019.
ANDREA C, FABIO S, JONATHAN D, et al. Choked cavitation in micro-orifices an experimental study[J].Experimental Thermal and Fluid Science, 2016, 74:49-57.
沈琦,刘鸿国,杨菁.超超临界垂直管圈直流炉水冷壁节流孔圈垢物聚结原因分析及预防[J].华东电力,2009, 37(5):877-879.SHEN Qi, LIU Hongguo, YANG Jing. Analysis and prevention of sulfate scale on throttle orifices for water walls of USC vertical tube coil once-through boilers[J].East China Electric Power, 2009, 37(5):877-879.
MAX S, ANDREA C, FABIO S, et al. Effect of thickness to diameter ratio on micro-orifice single-phase liquid flow at low Reynolds number[J]. Experimental Thermal and Fluid Science, 2018, 97:218-222.
张鑫,李鑫钢,姜斌.四氧化三铁纳米粒子合成及表征[J].化学工业与工程, 2006, 23(1):45-48.ZHANG Xin, LI Xingang, JIANG Bin. Preparation and characterization of nanometer magnetite[J]. Chemical Industry and Engineering, 2006, 23(1):45-48.
STEFANO C, JONATHAN D, ANDREA C, et al.Deposition of corrosion products under pressurised water nuclear reactor conditions:the effect of flow velocity and dissolved hydrogen[J]. Corrosion Science, 2019, 159:108113-108122.
EPSTEIN N. Elements of particle deposition onto nonporous solid surfaces parallel to suspension flows[J].Experimental Thermal and Fluid Science, 1997, 14:323-334.
GUILLODO M, GUINGO M, FOUCAULT M, et al.Experimental and numerical study of deposit formation in secondary side SG and TSP by electro kinetic approach[C]. Nuclear Plant Chemistry Conference, 2012.
BRUN C, ENGLER N, BERTHOLLON G, et al.Investigation on the relation between pressure drops and fluid chemical treatment[C]. International conference of Water Chemistry of Nuclear Reactor Systems, 2002.
CASSINERI S, CIONCOLINI A, CURIONI M, et al.Understanding the effect of Li and flow velocity on corrosion deposition at 230℃hydrogenated water[J].Corrosion Science, 2020, 168:108588-108598.
STEFANO C, MICHELE C, ANDREW B, et al.Exploring the effect of cathodic polarization to mitigate CRUD deposition[J]. Nuclear Engineering and Design,2020, 366:110764-110770.
FABIO S, GAETANO P, NICHOLAS S, et al.Investigation of the role of electro kinetic effects in corrosion deposit formation[J]. Corrosion Science, 2014,87:71-79.
ANDREA C, STEFANO C, JONATHAN D, et al. Microorifice single-phase flow at very high Reynolds number[J]. Experimental Thermal and Fluid Science,2018, 91:35-40.
VIDOJKOVIC S M, RAKIN M P. Surface properties of magnetite in high temperature aqueous electrolyte solutions:a review[J]. Advances in Colloid and Interface Science, 2017, 245:108-129.