LIAO Weihui, RAO Yong, LYU Xingcheng, et al. Experimental study on sodium release characteristics during thermal conversion of high-alkali coal[J]. Thermal power generation, 2024, 53(1): 82-90.
DOI:
LIAO Weihui, RAO Yong, LYU Xingcheng, et al. Experimental study on sodium release characteristics during thermal conversion of high-alkali coal[J]. Thermal power generation, 2024, 53(1): 82-90. DOI: 10.19666/j.rlfd.202309164.
Experimental study on sodium release characteristics during thermal conversion of high-alkali coal
In order to study release characteristics of sodium during thermal conversion of high-alkali coals
the release characteristics of sodium in high-sodium coal and low-sodium coal were compared and analyzed through combustion experiments and pyrolysis experiments of raw coal and water-washed coal
so as to explore the release law changes of different forms of sodium in coal samples during combustion and the influence of atmosphere changes on sodium release. The results show that
during the combustion experiment
the release of sodium from high-alkali coal increases slowly at 300~500 ℃ and rapidly at 500~1 100 ℃
and the release of sodium from low-alkali coal increases rapidly at 300~500 ℃ and slowly at 500~1 100 ℃. It can be seen that
coal quality is one of the main reasons affecting sodium release
and sodium release will be greatly affected by the difference in coal composition. The release law of sodium during combustion and pyrolysis is basically the same
the sodium release rate changes slowly during the pyrolysis process
and is about 7.0% lower than that of the combustion process. The release characteristics of organic sodium and water-soluble sodium are different due to different release routes.