Effect of peak temperature of welding thermal cycle on microstructure property of heat affected zone of 1 000 MPa grade ultra-high strength steel

SUN Qi; LI Taijiang; LI Wei; LI Shengwen; YU Yang; LI Jutao; LOU Zhengji; XU Bowei; CHENG Yefeng

doi:10.19666/j.rlfd.202309151

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

Effect of peak temperature of welding thermal cycle on microstructure property of heat affected zone of 1 000 MPa grade ultra-high strength steel

更新时间：2025-09-28

- Effect of peak temperature of welding thermal cycle on microstructure property of heat affected zone of 1 000 MPa grade ultra-high strength steel
- Thermal Power Generation Vol. 53, Issue 4, Pages: 165-173(2024)
- 作者机构：
  
  西安热工研究院有限公司
- 作者简介：
- 基金信息：
- DOI：10.19666/j.rlfd.202309151
  CLC： TG457.11
- Published：2024
- 稿件说明：
移动端阅览
SUN Qi, LI Taijiang, LI Wei, et al. Effect of peak temperature of welding thermal cycle on microstructure property of heat affected zone of 1 000 MPa grade ultra-high strength steel[J]. Thermal power generation, 2024, 53(4): 165-173.
DOI：

SUN Qi, LI Taijiang, LI Wei, et al. Effect of peak temperature of welding thermal cycle on microstructure property of heat affected zone of 1 000 MPa grade ultra-high strength steel[J]. Thermal power generation, 2024, 53(4): 165-173. DOI： 10.19666/j.rlfd.202309151.

摘要

为研究1 000 MPa级超高强钢焊接热影响区（HAZ）不同区域的组织性能，采用焊接热模拟技术制备了试验钢在不同热循环峰值温度下的试样，通过夏比冲击试验研究了HAZ不同区域的冲击韧性。结果表明：在亚临界区（SCHAZ）、临界区（ICHAZ）和细晶区（FGHAZ），样品冲击吸收能量、裂纹扩展能量和动态冲击韧度较大，断口上形成较大面积的脚跟形纤维区和剪切唇，微观可看到大小不一的韧窝，样品冲击韧性较好；在粗晶区（CGHAZ），样品各项冲击数据均急剧下降，断口呈宏观脆性断裂，几乎全为放射区，微观下显示准解理断裂特征，表明裂纹扩展时受到的阻力减小，裂纹萌生后稳定扩展的时间减少，失稳扩展较快，样品的冲击韧性恶化，CGHAZ为HAZ中的韧性谷区；组织分析表明，粗大的晶粒和粗大的马氏体板条是导致CGHAZ脆化的主要原因。该结论为探究1 000 MPa级超高强钢在水电工程中的优选研制及工程应用奠定了理论基础。

Abstract

In order to study the microstructure properties of different regions of welding heat affected zone(HAZ)of 1 000 MPa grade ultra-high strength steel

the samples of test steel at different peak temperatures of thermal cycle were prepared by welding thermal simulation technique

and the impact toughness of different regions of HAZ was studied through Charpy impact tests. The results showed that

in the subcritical region of HAZ(SCHAZ)

the intercritical region of HAZ(ICHAZ) and the fine-grained region of HAZ(FGHAZ)

the samples had relatively high impact absorption energy

crack propagation energy and dynamic impact toughness

and a large area of fiber region and shear lip formed on the fracture surface. Toughness dimples of different sizes can be seen at the microscopic level. The samples had good impact toughness. In the coarse-grained region of HAZ(CGHAZ)

all impact data of the samples sharply decreased

and the fracture showed a macroscopic brittle fracture

almost all of which are radiological regions. At the microscopic level

it showed quasi cleavage fracture characteristics

indicating that the resistance to crack propagation decreased

and the time for stable propagation decreased after crack initiation

and the instability propagation was fast. The impact toughness of the samples deteriorated

and the CGHAZ region was a ductile valley region in HAZ. The results showed that the coarse grains and the coarse M-A island were the main causes of embrittlement in the CGHAZ region. The conclusion lays a theoretical foundation for the selection

development and engineering application of 1 000 MPa grade ultra-high strength steel in hydropower projects.

关键词

Keywords

references

Views

148

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

STUDY ON PERFORMANCE OF HIGH HARDNESS AND LOW HARDNESS WELD JOINTS ON P91 MAIN STEAM PIPE

HARDNESS CONTROL FOR BASE MATERIAL AND WELDED JOINTS OF 9%～12% Cr MARTENSITE STEEL

Comparison of properties of domestic 10Cr rotor forging steel with materials abroad

Experiment of fracture characteristics of 10Cr rotor steel used in 600℃ USC steam turbines

Related Author

GUI Li-cheng2(1.Xi'an Thermal Power Research Institute Co Ltd

WANG Da-guang2

YAN Jian-bin2

CAI Lian-yuan2

SHI Zhi-gang1

LI Yi-min1

SHANG Hai-junXi'an Thermal Power Research Institute Co Ltd

HAN Chuan-gao

Related Institution

Xigu Thermal Power Co., Ltd

Xinxiang Zhongyi Power Generation Co., Ltd

Harbin Turbine Factory

Harbin Turbine Works Co., Ltd

AI问答

⁰