Numerical study on cooling performance of Nekomimi film holes

YU Feilong; XIAO Junfeng; GAO Song; LI Yuanyuan; DUAN Jingyao; CAI Liuxi; SHANGGUAN Bo

doi:10.19666/j.rlfd.201711170

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

Numerical study on cooling performance of Nekomimi film holes

更新时间：2025-09-28

- Numerical study on cooling performance of Nekomimi film holes
- Thermal Power Generation Vol. 47, Issue 9, Pages: 48-55(2018)
- 作者机构：
  
  西安热工研究院有限公司
- 作者简介：
- 基金信息：
- DOI：10.19666/j.rlfd.201711170
  CLC： TK479
- Published Online：03 September 2018，
  
  Published：2018
- 稿件说明：
移动端阅览
YU Feilong, XIAO Junfeng, GAO Song, et al. Numerical study on cooling performance of Nekomimi film holes[J]. Thermal power generation, 2018, 47(9): 48-55.
DOI：

YU Feilong, XIAO Junfeng, GAO Song, et al. Numerical study on cooling performance of Nekomimi film holes[J]. Thermal power generation, 2018, 47(9): 48-55. DOI： 10.19666/j.rlfd.201711170.

摘要

为了研究透平静叶不同位置处猫耳气膜孔的冷却性能

对7种猫耳气膜孔结构在吹风比为0.5、1.0、1.5和2.0时的冷却效率曲线进行分析。结果表明:前向角大小是影响猫耳气膜孔冷却性能的关键参数;随着吹风比的增大

静叶压力面靠近前缘的气膜孔纵向平均冷却效率有降低趋势;提高前向角起始位置会使下游中心线附近冷却效率增大

但纵向平均气膜冷却效率较低。

Abstract

To investigate the cooling performance of Nekomimi film hole at different positions of turbine stator vane

film cooling efficiency curves of seven kinds of Nekomimi film hole structures at the blowing ratios of 0.5

1.0

1.5 and 2.0 are analyzed. The results show that the forward angle is the key parameter affecting the cooling performance of Nekomimi film hole. With the increasing of the blowing ratio

the longitudinal average cooling efficiency of the film hole near the leading edge of the stator vane pressure surface has a decreasing tendency. Besides

raising the starting position of the forward angle can increase the cooling efficiency near the downstream centerline but decrease the longitudinal average film cooling efficiency.

关键词

Keywords

references

Views

134

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of wall thickness on film cooling effectiveness: numerical simulation

Influence of coolant crossflow on film cooling effectiveness of one-inlet and double-outlet injection holes

Investigation on film cooling effectiveness of fanned hole with broad outlet

Effect of double rows of film holes interaction on film cooling efficiency

ANALYSIS OF FLOW AND HEAT TRANSFER CHARACTERS FOR POWER GENERATION SYSTEM EQUIPED WITH HOT-AIR-FLOW TURBINE USING SOLAR ENERGY

Related Author

PENG Ningjian

LI Guangchao

ZHANG Wei

KOU Zhihai

MAO Xiaodong

ZHANG Guochen

ZHAO Guochang

KOU Zhihai

Related Institution

Liaoning Province Key Laboratory of Advanced Testing Technology for Aerospace Propulsion Systems, Shenyang University of Aeronautics and Astronautics

School of Aerospace Engineering, Shenyang University of Aeronautics and Astronautics

School of Mechanical Science and Engineering, Huazhong University of Science and Technology

Robotics College of Guangdong Institute of Technology

College of Mechanical and Transportation Engineering, Taiyuan University of Technology

AI问答

⁰