Study on flow characteristics of cold-state falling film outside horizontal tubes

ZHANG Yousen; ZHANG Jianli; LI Huixiong; YANG Qingwei; ZHOU Biao

doi:10.19666/j.rlfd.201709191

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

Study on flow characteristics of cold-state falling film outside horizontal tubes

更新时间：2025-09-28

- Study on flow characteristics of cold-state falling film outside horizontal tubes
- Thermal Power Generation Vol. 47, Issue 6, Pages: 57-63(2018)
- 作者机构：
  
  1. 神华国华(北京)电力研究院有限公司
  2. 西安交通大学能源与动力工程学院
- 作者简介：
- 基金信息：
- DOI：10.19666/j.rlfd.201709191
  CLC： TK12
- Published Online：06 June 2018，
  
  Published：2018
- 稿件说明：
移动端阅览
ZHANG Yousen, ZHANG Jianli, LI Huixiong, et al. Study on flow characteristics of cold-state falling film outside horizontal tubes[J]. Thermal power generation, 2018, 47(6): 57-63.
DOI：

ZHANG Yousen, ZHANG Jianli, LI Huixiong, et al. Study on flow characteristics of cold-state falling film outside horizontal tubes[J]. Thermal power generation, 2018, 47(6): 57-63. DOI： 10.19666/j.rlfd.201709191.

摘要

采用VOF(volume of fluid)方法建立水平管外冷态降膜流动的计算模型

对冷态液膜流动条件下水平管外的液膜厚度分布以及流体速度分布规律进行研究

分析喷淋密度、流动截面位置及壁面距离对速度场的影响。数值计算结果表明:液体喷淋密度越大

水平管外液膜的流动速度越快;在降膜液柱所在的截面处

液膜周向速度随周向角的增大而增大;在相邻降膜液柱的中间截面处

液膜周向速度随周向角的增大而增大

在30°~110°周向角内液膜周向速度快速增加

在120°~150°周向角内液膜周向速度变化较为平缓。

Abstract

The calculation model of cold-state falling film flow outside horizontal tubes is established by volume of fluid(VOF)method. The distribution rules of liquid film thickness and velocity outside horizontal tubes under the flowing cold-state falling film condition are studied. Effects of sprinkle density

cross section position and distance from wall on velocity field are analyzed. The results of numerical calculation show that the flow velocity of liquid film outside horizontal tubes increases with the increasing sprinkle densities. The circumferential velocity of liquid film increases with the increasing circumferential angle at the cross section of falling film column. Moreover

the circumferential velocity of liquid film at middle cross section between adjacent falling film columns shows an ascending tendency with the increasing circumferential angle. The circumferential velocity of liquid film increases fast with the angle in the range of 30° to 110°

while the circumferential velocity of liquid film is smoothly changed in the range of 120° to 150°.

关键词

Keywords

references

Views

159

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

THE INFLUENCE OF STEAM FLOW FIELD AT CONDENSER'S TUBEBUNDLE INLET UPON EXHAUST PRESSURE OF STEAM TURBINE

DESIGN AND ECONOMIC OPERATION OF DOUBLE-SPEED CIRCULATORY WATER PUMP FOR 135 MW INDIRECT AIR-COOLED UNIT

Measurment and empirical correlation of heat transfer coefficient in external heat exchanger of a CFB boiler

Experimental investigation on performance of direct air-cooled heat exchanger elements of double-row tubes

Discussions on tube bundle arrangement factor for condensers in steam turbines

Related Author

WAN Kuifang

WANG Hongtao

PENG Xiangyu

AN Gui-cheng

LI Li

ZHAO Pengbo

LIU Haifeng

JIN Senwang

Related Institution

Shenyang Institute of Technology

Datang Changshan Thermal Power Plant

Huazhong Power Grid Co., Ltd

Yangmei Group Coal Gangue Power Plant

AI问答

⁰