QIAN Yuan-ji, WU Zhan-song Qinghua University. TEST STUDY ON BATCHED HIGH TEMPERATURE PYROLYSIS OF SOME MSW[J]. Thermal power generation, 2008, (1): 36-39.
DOI:
QIAN Yuan-ji, WU Zhan-song Qinghua University. TEST STUDY ON BATCHED HIGH TEMPERATURE PYROLYSIS OF SOME MSW[J]. Thermal power generation, 2008, (1): 36-39. DOI: 10.19666/j.rlfd.2008.01.009.
TEST STUDY ON BATCHED HIGH TEMPERATURE PYROLYSIS OF SOME MSW
摘要
为了研究固体废物批量热解特性
在试验台上进行了批量规模的高温热解试验
得到了各样本的热解气组分和产气率。同时
通过热解动力学分析
得出塑料类热解反应主要受热传递过程控制
热解较慢
产气率高(约60%)
热值也高(约30MJ/m3);生物质类热解主要由反应速率控制
热解快
在高温下产气率也高达60%
但由于热解气中含有较多CO2
热值中等(约18MJ/m3)。
Abstract
In order to study the characterisetics of batched high temperature pyrolysis of some mumicipal solid waste(MSW)
a batched-scale pyrolysis test has been carried out on the test stand
obtaining pyrolystic gas compents and gas-producing rate of each specimen.At the same time
through pyrolysis dynamic analysis
it is obtained that the pyrolysis reaction of plastic waste is mainly controlled by heat transfer
the pyrolysis process is comparatively low
but having high gas-producing rate(about 60%)
and high calorific value(about 30 MJ/m3).The pyrolysis of biomass is mainly controlled by the reaction rate
having rapid pyrolysis rate
and its gas-proclucing rate being also high up to 60% at high temperature