MODEL TEST AND NUMERICAL ANALYSIS OF FLOW FIELD IN SCR DENITRIFICATION SYSTEM IN SECOND-PHASE PROJECT OF SANHE POWER PLANT

XU Fu-rong1; DING Heng2; JIANG Bai-qing3; SHAO Xue-ming41.Energy Source Science & Technology Co Ltd under Zhejiang University

doi:10.19666/j.rlfd.2007.11.008

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

MODEL TEST AND NUMERICAL ANALYSIS OF FLOW FIELD IN SCR DENITRIFICATION SYSTEM IN SECOND-PHASE PROJECT OF SANHE POWER PLANT

更新时间：2025-09-28

- MODEL TEST AND NUMERICAL ANALYSIS OF FLOW FIELD IN SCR DENITRIFICATION SYSTEM IN SECOND-PHASE PROJECT OF SANHE POWER PLANT
- Thermal Power Generation Issue 11, Pages: 28-32(2007)
- 作者机构：
  
  1. 浙江融智能源科技有限公司
  2. 北京国华电力有限责任公司
  3. 国华三河电厂
  4. 浙江大学
- 作者简介：
- 基金信息：
- DOI：10.19666/j.rlfd.2007.11.008
  CLC： X701
- Published：2007
- 稿件说明：
移动端阅览
XU Fu-rong1, DING Heng2, JIANG Bai-qing3, et al. MODEL TEST AND NUMERICAL ANALYSIS OF FLOW FIELD IN SCR DENITRIFICATION SYSTEM IN SECOND-PHASE PROJECT OF SANHE POWER PLANT[J]. Thermal power generation, 2007, (11): 28-32.
DOI：

XU Fu-rong1, DING Heng2, JIANG Bai-qing3, et al. MODEL TEST AND NUMERICAL ANALYSIS OF FLOW FIELD IN SCR DENITRIFICATION SYSTEM IN SECOND-PHASE PROJECT OF SANHE POWER PLANT[J]. Thermal power generation, 2007, (11): 28-32. DOI： 10.19666/j.rlfd.2007.11.008.

摘要

结合三河电厂二期2×300MW机组SCR脱硝项目

通过冷模试验和数值模拟相结合的方法

对脱硝装置烟道中的整流装置、均流格栅、喷射格栅及导流板等装置进行优化设计

使烟气流场达到了设计要求。

Abstract

Combing with selective catalystic reduction (SCR) denitrification projict for 2×300 MW units in second-phase project of Sanhe Power Plant

and through combined method of cold model test with numerical simulation

the design optimization of rectification facility

flow equalizing grate

spraying grate

and flow-guiding plate etc.. in flue duct of the denitrification system has been carried out

making the flow field of flue gas to reach requirements of design.

关键词

Keywords

references

Views

404

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Flow field in the upstream circular primary air duct of medium speed mills:numerical simulation and optimization design

Layout and optimization of a new-type connecting flue with side-inlet and side-outlet for SCR denitrification systems

Resistance characteristics of 90° shrunk bend pipe connector of flue gas duct for a 1 000 MW unit

Resistance in hot secondary air duct in a 1 000 MW unit boiler manufactured in Dongfang Boiler Group

Related Author

LI Zhiqiang

SHEN Zhiyong

MA Xiuyuan

CHEN Baokang

WANG Xiaohua

PENG Xiaomin

XU Miaofeng

CHEN Min

Related Institution

State Power Environmental Protection Research Institute

Xi'an Thermal Power Research Institute Co.,Ltd.

Xi’an Thermal Environmental Engineering Co., Ltd.

Xi’an Thermal Power Research Institute Co., Ltd.

School of Power and Mechanical Engineering, Wuhan University

AI问答

⁰