EXPERIMENTAL STUDY ON VERIFICATION OF RETROFITTING MODIFICATION OF LP FURBINE FLOW PATH

doi:10.19666/j.rlfd.1998.05.007

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

EXPERIMENTAL STUDY ON VERIFICATION OF RETROFITTING MODIFICATION OF LP FURBINE FLOW PATH

更新时间：2025-09-28

- EXPERIMENTAL STUDY ON VERIFICATION OF RETROFITTING MODIFICATION OF LP FURBINE FLOW PATH
- Thermal Power Generation Issue 5, Pages: 22-26(1998)
- 作者机构：
  
  电力部热工研究院,西安,710032
- 作者简介：
- 基金信息：
- DOI：10.19666/j.rlfd.1998.05.007
  CLC： TK26
- Published：1998
- 稿件说明：
移动端阅览
EXPERIMENTAL STUDY ON VERIFICATION OF RETROFITTING MODIFICATION OF LP FURBINE FLOW PATH[J]. Thermal power generation, 1998, (5): 22-26.
DOI：

EXPERIMENTAL STUDY ON VERIFICATION OF RETROFITTING MODIFICATION OF LP FURBINE FLOW PATH[J]. Thermal power generation, 1998, (5): 22-26. DOI： 10.19666/j.rlfd.1998.05.007.

摘要

首台２００ＭＷ汽轮机低压缸通流部分改造在白马发电厂２１号机组上实施成功。热工研究院采用目前国际上最高精度等级的ＡＳＭＥＰＴＣ６汽轮机性能试验规程对其改造前、后的热力性能进行验证试验。试验结果表明改造后机组热耗率降低，低压缸效率提高。同时还由此探讨了两种验证试验方法（ＡＳＭＥＰＴＣ６和ＡＳＭＥＰＴＣ６．１规程）的特点和适用条件。对某一制造厂的首台或第二台低压缸改造的试点机组宜采用前者进行验证，而当该改造技术推广后可采用后者进行验证。

Abstract

The first modification of 200MW turbine LP part flow path has been successfully conducted on NQ21 unit in Baima Power plant. TPRI carried out the verification tests before and after the modification in accordance with ASME PTC6. The results show that after the modification the specific heat consumption has been reduced and effectiveness of LP furbine arised. Meanwhile the adoption condition of two test methods （ASME PTC6 and ASME PTC 1. 6） has been studied. It is consid- ered that for the first or the second LP turbine modification made by a turbine works it is rational to use the ASME PTC6

and the A SME PTC1. 6 can be used for the modification with proved technologies.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Progress of quantitative evaluation of wetness losses in steam turbine

ANALYSIS AND EVALUATION OF TECHNICAL RETROFITTING FOR FLOW PASSAGE PART OF 100MW TURBINE AT QINGSHAN THERMAL POWER PLANT

RETROFIT OF STEAM TURBINE FOR CAPACITY-UPGRADING AND EFFICIENCY-ENHANCING IN THERMAL POWER PLANT UNDER QILU PETRO-CHEMICAL CORP

CAUSE ANALYSIS OF BLADE BREAKAGE IN LOWPRESSURE CYLINDER OF C50-90/13 TYPE STEAM TURBINE AND COMPARISON OF RESOLVING COUNTERMEASURES THEREOF

RETROFIT OF LOW-PRESSURE CASING'S FLOW PASSAGE FOR 200 MW STEAM TURBINES IN SHAOGUANG POWER PLANT

Related Author

HAN Zhonghe

HAN Xu

LI Peng

宋少华

黄树红

肖建明

刘俊忠

孙玉忠

Related Institution

Key Lab of Condition Monitoring and Control for Power Plant Equipment,Ministry of Education,North China Electric Power University

Huazhong University of Science and Technology

Qingshan Thermal Power Plant

Qilu Petrochemical Company Thermal Power Plant

AI问答

⁰