In DC distributed power systems (DPSs)

the complex impedance interactions possibly lead to DC bus voltage oscillation or collapse. In previous research

the stability analysis of DPSs is implemented based on mathematical analysis in control theory. The specific mechanisms of the instability of the cascade system have not been intuitively clarified. In this paper

the stability analysis of DPSs based on the traditional Nyquist criterion is simplified to the resonance analysis of the series-connected port impedance (Z = R + jX) of source and load converters. It reveals that the essential reason for impedance instability of a DC cascade system is that the negative damping characteristic (R < 0) of the port the overall impedance amplifies the internal resonance source at reactance zero-crossing frequency. The simplified stability criterion for DC cascade systems can be concluded as: in the negative damping frequency ranges (R < 0)

there exists no zero-crossing point of the reactance component (i.e.

X = 0). According to the proposed stability criterion

the oscillation modes of cascade systems are classified. A typical one is the internal impedance instability excited by the negative damping

and the other one is that the external disturbance amplified by negativity in a low stability margin. Thus

the impedance reshaping method for stability improvement of the system can be further specified. The validity of the simplified criterion is verified theoretically and experimentally by a positive damping reshaping method.