The concept of a flexible power electronics substation (FPES) was first applied in the Zhangbei DC distribution network demonstration project. As a multi-port power electronics transformer (PET) with different AC and DC voltage levels

the FPES has adopted a novel topology integrating modular multilevel converter (MMC) and four-winding medium frequency transformer (FWMFT) based multiport DC-DC converter

which can significantly reduce capacitance in each sub-module (SM) of a MMC and also save space and cost. In this paper

in order to accelerate speed of electromagnetic transient (EMT) simulations of FPES based hybrid AC/DC distribution systems

an averaged-value model (AVM) is proposed for efficient and accurate representation of FPES. Assume that all SM capacitor voltages are perfectly balanced in the MMC

then the MMC behavior can be modeled using controlled voltage sources based on modulation voltages from control systems. In terms of the averaged current transfer characteristics among the windings of the FWMFT

we consider that all multiport DC-DC converters are controlled with the same dynamics

a lumped averaged model using controlled current and voltage sources has been developed for these four-port DC-DC converters connected to the upper or lower arms of the MMC. The presented FPES AVM model has been tested and validated by comparison with a detailed IGBT-based EMT model. Results show that the AVM is significantly more efficient while maintaining its accuracy in an EMT simulation.