Review of charge accumulation on spacers of gas insulated equipment at DC stress
Regular Papers|更新时间:2026-10-15
|
Review of charge accumulation on spacers of gas insulated equipment at DC stress
CSEE Journal of Power and Energy SystemsVol. 6, Issue 3, Pages: 496-517(2020)
作者机构:
1. State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources and the Beijing Key Laboratory of High Voltage and EMC, North China Electric Power University,Beijing,China
2. Institute of Electrical Engineering,Beijing,China
3. Department of Electrical Engineering, Tsinghua University,Beijing,China
Hongyang Zhou, Guoming Ma, Cong Wang, et al. Review of charge accumulation on spacers of gas insulated equipment at DC stress[J]. CSEE Journal of Power and Energy Systems, 2020, 6(3): 496-517.
DOI:
Hongyang Zhou, Guoming Ma, Cong Wang, et al. Review of charge accumulation on spacers of gas insulated equipment at DC stress[J]. CSEE Journal of Power and Energy Systems, 2020, 6(3): 496-517.DOI: 10.17775/CSEEJPES.2019.00820.
Review of charge accumulation on spacers of gas insulated equipment at DC stress
Charge accumulation on the spacer surface in gas insulated equipment is very severe in the DC field
leading to easy flashover
which restricts the application of DC GIS/GIL. Therefore
knowledge about the charge accumulation characteristics of gas insulated equipment at DC stress is essential. In this paper
we reviewed the research methods and the characteristics of charge accumulation on spacers. A summary of charge measurement methods and setups are presented. And the surface charge inversion algorithms are introduced. Then the simulation model for charge accumulation in the DC field is reviewed. Subsequently
the charge accumulation mechanisms and phenomenon
the influence factor of surface charge accumulation and the influence of accumulated charge on spacer insulation characteristics are summarized. In addition
some suppression methods of surface charge accumulation are discussed. Finally
based on the understanding of charge accumulation on spacers
some suggestions on further studies are presented to aid in the design of a better spacer free from surface charges.