Design and Optimization of Friction Winch for 25 MW Airborne Wind Energy Systems

NIU Lizhao; YIN Kuo; LEI Chonghui

doi:10.16516/j.ceec.2024-257

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

Design and Optimization of Friction Winch for 25 MW Airborne Wind Energy Systems

更新时间：2025-10-22

- Design and Optimization of Friction Winch for 25 MW Airborne Wind Energy Systems
- Southern Energy Construction Vol. 12, Issue 1, Pages: 12-21(2025)
- 作者机构：
  
  1. 北京电力设备总厂有限公司,北京,102401
  2. 广东石化有限责任公司,广东,揭阳,515200
- 作者简介：
- 基金信息：
- DOI：10.16516/j.ceec.2024-257
  CLC： TM756.2;TK89
- Published Online：28 October 2024，
  
  Published：2025
- 稿件说明：
移动端阅览
牛力钊，尹阔，雷崇晖. 25 MW级高空风电用摩擦卷扬机设计及优化[J]. 南方能源建设，2025，12（1）：12-21..

NIU Lizhao, YIN Kuo, LEI Chonghui. Design and Optimization of Friction Winch for 25 MW Airborne Wind Energy Systems[J]. Southern energy construction, 2025, 12(1): 12-21.
牛力钊，尹阔，雷崇晖. 25 MW级高空风电用摩擦卷扬机设计及优化[J]. 南方能源建设，2025，12（1）：12-21.. DOI： 10.16516/j.ceec.2024-257.

NIU Lizhao, YIN Kuo, LEI Chonghui. Design and Optimization of Friction Winch for 25 MW Airborne Wind Energy Systems[J]. Southern energy construction, 2025, 12(1): 12-21. DOI： 10.16516/j.ceec.2024-257.

摘要

目的

方法

结果

结论

Abstract

Objective

Method

Result

Conclusion

关键词

Keywords

references

SHAO L, MAO H L, XING S, et al. Review on development status and key technology of airborne wind energy system [J]. Advances in new and renewable energy, 2020, 8(6): 477-485. DOI: 10.3969/j.issn.2095-560X.2020.06.005.

邵垒, 毛虹霖, 邢胜, 等. 高空风力发电发展现状及关键技术研究综述 [J]. 新能源进展, 2020, 8(6): 477-485. DOI: 10.3969/j.issn.2095-560X.2020.06.005.

CANALE M, FAGIANO L, MILANESE M. KiteGen: a revolution in wind energy generation [J]. Energy, 2009, 34(3): 355-361. DOI: 10.1016/j.energy.2008.10.003.

LIU Y G, WANG Y K, WAN Z Q, et al. Research progress and prospect of tethered floating wind energy generation technology [J]. Advances in aeronautical science and engineering, 2021, 12(4): 36-43. DOI: 10.16615/j.cnki.1674-8190.2021.04.04.

刘耀广, 王耀坤, 万志强, 等. 系留悬浮式风力发电技术的研究进展与展望 [J]. 航空工程进展, 2021, 12(4): 36-43. DOI: 10.16615/j.cnki.1674-8190.2021.04.04.

WANG R Q, YAN D, LI L Q, et al. Advances and challenges of crosswind mode airborne wind energy aircrafts [J]. Advances in aeronautical science and engineering, 2018, 9(2): 139-146. DOI: 10.16615/j.cnki.1674-8190.2018.02.001.

王若钦, 严德, 李柳青, 等. 切风模式风力发电飞行器的进展与挑战 [J]. 航空工程进展, 2018, 9(2): 139-146. DOI: 10.16615/j.cnki.1674-8190.2018.02.001.

ZHANG C X, YUE Z K. Structural design of Chinese loong multi umbrella embedded kite power generation device [J]. Technology innovation and application, 2022, 12(16): 46-48, 52. DOI: 10.19981/j.CN23-1581/G3.2022.16.009.

张晨星, 岳泽锴. 中国龙多伞内嵌式风筝发电装置结构设计 [J]. 科技创新与应用, 2022, 12(16): 46-48, 52. DOI: 10.19981/j.CN23-1581/G3.2022.16.009.

WEI L G, QI Y, ZHONG M, et al. Research on ground equipment for high altitude wind energy generation [J]. Construction machinery and equipment, 2023, 54(5): 72-77. DOI: 10.3969/j.issn.1000-1212.2023.05.014.

魏辽国, 齐悦, 钟明, 等. 高空风能发电地面设备的研究 [J]. 工程机械, 2023, 54(5): 72-77. DOI: 10.3969/j.issn.1000-1212.2023.05.014.

WU J M, LU P, WANG D Y. Foreign pipeline laying winch technology research and suggestions for domestic development [J]. China petroleum machinery, 2009, 37(6): 84-87.

吴建民, 陆品, 王定亚. 国外铺管绞车技术研究与国产化发展建议 [J]. 石油机械, 2009, 37(6): 84-87.

YU K A, WANG X B, ZHONG C T, et al. Design study of a double-drum winch for deepwater subsea pipeline laying [J]. China petroleum machinery, 2011, 39(2): 41-44. DOI: 10.16082/j.cnki.issn.1001-4578.2011.02.014.

喻开安, 王晓波, 钟朝廷, 等. 用于深水海管铺设的双滚筒绞车设计研究 [J]. 石油机械, 2011, 39(2): 41-44. DOI: 10.16082/j.cnki.issn.1001-4578.2011.02.014.

WANG S F, CHEN L. Winch design points of large double-drum friction [J]. Ship engineering, 2023, 45(Suppl.1): 216-219, 233. DOI: 10.13788/j.cnki.cbgc.2023.S1.043.

王硕锋, 陈雷. 大型双滚筒摩擦绞车的设计要点 [J]. 船舶工程, 2023, 45(增刊1): 216-219, 233. DOI: 10.13788/j.cnki.cbgc.2023.S1.043.

JIANG Q Q, MENG G, WANG J M. Theoretical study of Euler's formula and loss elimination effect on rope windings of winch drum [J]. International journal of mechanics research, 2016, 5(1): 10-16. DOI: 10.12677/IJM.2016.51002.

江祺琦, 孟光, 王建明. 卷扬机钢丝绳欧拉公式及欧拉衰减的研究 [J]. 力学研究, 2016, 5(1): 10-16. DOI: 10.12677/IJM.2016.51002.

XU Q, ZHANG T S, LI J, et al. Analysis and solution to rope disorder of winch with rope guide [J]. Construction mechanization, 2023, 44(5): 85-87. DOI: 10.3969/j.issn.1001-1366.2023.05.024.

徐强, 张亭森, 李靖, 等. 卷扬机乱绳问题分析及解决方法 [J]. 建筑机械化, 2023, 44(5): 85-87. DOI: 10.3969/j.issn.1001-1366.2023.05.024.

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. Rolling bearings-internal clearance-part 1: radial internal clearance for radial bearings: GB/T 4604.1—2012 [S]. Beijing: Standards Press of China, 2013.

中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. 滚动轴承游隙第1部分: 向心轴承的径向游隙: GB/T 4604.1—2012 [S]. 北京: 中国标准出版社, 2013.

DING M, GENG D, ZHOU M D, et al. Topology optimization strategy of structural strength based on variable density method [J]. Journal of Shanghai Jiaotong University, 2021, 55(6): 764-773. DOI: 10.16183/j.cnki.jsjtu.2019.301.

丁卯, 耿达, 周明东, 等. 基于变密度法的结构强度拓扑优化策略 [J]. 上海交通大学学报, 2021, 55(6): 764-773. DOI: 10.16183/j.cnki.jsjtu.2019.301.

WANG D Q, XIE Z J, YANG Z, et al. Topology optimization of the launching bracket for weapon station towers based on the variable density method [J]. Journal of ordnance equipment engineering, 2023, 44(3): 60-66. DOI: 10.11809/bqzbgcxb2023.03.009.

王端奇, 解志坚, 杨臻, 等. 基于变密度法的武器站塔台发射支架拓扑优化 [J]. 兵器装备工程学报, 2023, 44(3): 60-66. DOI: 10.11809/bqzbgcxb2023.03.009.

JIAO H Y, ZHOU Q C, LI W J, et al. Periodic topology optimization using variable density method [J]. Journal of mechanical engineering, 2013, 49(13): 132-138. DOI: 10.3901/JME.2013.13.132.

焦洪宇, 周奇才, 李文军, 等. 基于变密度法的周期性拓扑优化 [J]. 机械工程学报, 2013, 49(13): 132-138. DOI: 10.3901/JME.2013.13.132.

CHENG Q J. Relationship between the diameter ratio of the rope and the deflection angle of wire rope and multiplying power in design [J]. Hoisting and conveying machinery, 2022(1): 75-77. DOI: 10.3969/j.issn.1001-0785.2022.01.014.

程前进. 卷筒筒绳直径比、卷筒钢丝绳偏角与倍率间的设计关系 [J]. 起重运输机械, 2022(1): 75-77. DOI: 10.3969/j.issn.1001-0785.2022.01.014.

ZHANG Z W, WANG J N, CHENG W M, et al. Crane design handbook (2nd ed.) [M]. Beijing: China railway publishing house, 2013.

张质文, 王金诺, 程文明, 等. 起重机设计手册(2版) [M]. 北京: 中国铁道出版社, 2013.

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. Design rules for cranes: GB/T 3811—2008 [S]. Beijing: Standards Press of China, 2008.

中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. 起重机设计规范: GB/T 3811—2008 [S]. 北京: 中国标准出版社, 2008.

SU Q, WANG H B. Analysis and optimization of friction drum for photovoltaic module installation equipment [J]. Machine design research, 2023, 39(4): 252-256. DOI: 10.13952/j.cnki.jofmdr.2023.0163.

苏祺, 王海波. 光伏组件安装设备摩擦卷筒分析与优化 [J]. 机械设计与研究, 2023, 39(4): 252-256. DOI: 10.13952/j.cnki.jofmdr.2023.0163.

YE H, HU P, SHEN G Z, et al. Lightweight optimization design of car body based on sensitivity and side crash simulation [J]. Transactions of the Chinese society for agricultural machinery, 2010, 41(10): 18-22, 27. DOI: 10.3969/j.issn.1000-1298.2010.10.004.

叶辉, 胡平, 申国哲, 等. 基于灵敏度和碰撞仿真的汽车车身轻量化优化设计 [J]. 农业机械学报, 2010, 41(10): 18-22, 27. DOI: 10.3969/j.issn.1000-1298.2010.10.004.

HU Q G, HE Q, CHEN S X, et al. Winch drum multi-objective optimization design based on response surface method-improved artificial bee colony algorithm [J]. Machine tool hydraulics, 2022, 50(16): 75-81. DOI: 10.3969/j.issn.1001-3881.2022.16.015.

胡启国, 何奇, 陈思祥, 等. 基于响应面法-改进人工蜂群算法的绞车滚筒多目标优化设计 [J]. 机床与液压, 2022, 50(16): 75-81. DOI: 10.3969/j.issn.1001-3881.2022.16.015.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Load Model Construction and Parameter Identification Method of Inverter-Interfaced Distributed Generator

Related Author

Jie LI

Jie WANG

Wenteng LIANG

Lushan SHI

Bolun WANG

Yufeng XIONG

Liangju ZHANG

Xia ZHOU

Related Institution

State Grid Jiangsu Electric Power Co., Ltd.

NARI Technology Co., LTD.

Nanjing University of Posts and Telecommunications

AI问答

⁰