WU Bing, SHENG Jian-long, YE Zu-yang, et al. Nonlinear seepage-normal stress coupling model
for single fracture of rock mass[J]. 2025, 46(8): 2495-2504.
DOI:
WU Bing, SHENG Jian-long, YE Zu-yang, et al. Nonlinear seepage-normal stress coupling model
for single fracture of rock mass[J]. 2025, 46(8): 2495-2504.DOI: 10.16285/j.rsm.2024.1172.
Nonlinear seepage-normal stress coupling model
for single fracture of rock mass
To address the limitations of the traditional Forchheimer equation in describing the nonlinear seepage behavior of single fracture rock mass under high confining pressure and water pressure coupling
the two-part Hooke’s model (TPHM) was used to describe the relationship between the hydraulic aperture and the effective normal stress of single fracture. Linear coefficient A and nonlinear coefficient B were both characterized as functions of the effective normal stress. A modified Forchheimer model
which accounts for the coupled effect of nonlinear seepage and normal stress in single fractures
was presented
and the validity of the model was verified through experimental data and numerical simulations. Furthermore
the variation of linear coefficient A and nonlinear coefficient B under normal stress and fracture water pressure was analyzed. The hydro-mechanical coupling effect is significant for a single fracture under high confining pressure and high water pressure. The pressure gradient-flow test data increasingly deviate from the traditional Forchheimer equation
while the modified Forchheimer model remains consistent with the experimental data. When the fracture water pressure p is zero
the modified model reduces to the traditional Forchheimer equation without considering water pressure effects. The coefficients A and B are sensitive to the effective normal stress
increasing nonlinearly with the normal stress
and decreasing nonlinearly with increasing fracture water pressure. Compared to simulations that do not account for hydraulic coupling
the numerical model that considers hydraulic coupling requires a smaller pressure gradient for the same flow rate
and the simulation results are accurately described by the modified model.