Energy piles

as innovative energy underground structure

serve the dual purpose of shallow extracting geothermal energy while bearing the upper building load. There are few studies on the thermomechanical properties of energy piles under combined horizontal and vertical loads. The temperature change of pile body under combined horizontal and vertical loads will result in variations in pile bending moment

horizontal and vertical displacement

etc. This paper investigated the deformation characteristics of energy piles under combined vertical and horizontal loads through model tests with 10 heating-cooling cycles applied to the piles. The results showed that the heating-cooling cycles under combined load led to further increase in the pile bending moment

particularly affecting the middle section of the pile

with the maximum increase in pile bending moment reaching 117%. Additionally

the heating-cooling cycles caused cumulative displacement at the top of the pile. The vertical displacement of the test pile increased by 0.201 mm

and the increase in horizontal displacement due to the thermal cycles reached 1.46% D (D is the diameter of the pile). Simultaneously

the heating-cooling cycles induced a forward tilt of the pile

with the tilt angle reached 1.88×10 rad after 10 heating-cooling cycles and gradually increasing with the number of thermal cycles. Moreover

the soil pressure in front of the pile decreased during heating

while increased during cooling.