Mechanical properties of sand 3D printed rock-like samples based 
on different post-processing methods

TIAN Wei; WANG Xiao-hui; YUN Wei; CHENG Xu

doi:10.16285/j.rsm.2022.0886

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Mechanical properties of sand 3D printed rock-like samples based on different post-processing methods

更新时间：2026-06-25

- Mechanical properties of sand 3D printed rock-like samples based on different post-processing methods
- Vol. 44, Issue 5, Pages: 1330-1340(2023)
- 作者机构：
  
  长安大学建筑工程学院,陕西,西安,710061
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2022.0886
  CLC： TU45
- Online First：30 April 2023，
  
  Published：2023
- 稿件说明：
移动端阅览
TIAN Wei, WANG Xiao-hui, YUN Wei, et al. Mechanical properties of sand 3D printed rock-like samples based on different post-processing methods[J]. 2023, 44(5): 1330-1340.
DOI：

TIAN Wei, WANG Xiao-hui, YUN Wei, et al. Mechanical properties of sand 3D printed rock-like samples based on different post-processing methods[J]. 2023, 44(5): 1330-1340. DOI： 10.16285/j.rsm.2022.0886.

摘要

3D打印技术作为一种快速成型技术在岩石室内试验中有着极大的应用潜力，但3D打印试样的低强度、低刚度一直是亟待解决的关键问题之一。为了能够找到提高3D打印类岩石试样强度、刚度的方法，选用GS19砂和呋喃树脂为打印材料，以砂型3D打印类岩石试样为研究对象，在此基础上采用3种后处理方法（真空渗入、低温处理以及渗入低温相结合）分别对试样进行后处理，对经后处理的砂型3D打印类岩石试样开展单轴压缩试验以研究其力学性能，并结合扫描电镜从微观层面分析了力学性能变化的原因。研究表明：不同后处理方法会改变试样的力学性能，其中渗入、低温相结合的方法对试样的强度和刚度提高最为显著，这与试样内部胶结状态发生变化相关。研究结果可为今后3D打印技术在岩石试验中的应用提供新的研究思路。

Abstract

3D printing

a rapid prototyping technology

has great potential for applications in laboratory rock tests

but the low strength and stiffness of 3D printed samples have been one of the key problems that need to be addressed. In order to find a way to enhance the strength and stiffness of 3D printed rock-like samples

GS19 sand and furan resin were selected as printing materials

and sand 3D printed rock-like samples were used as research objects. Based on this

the samples were post-processed using three different methods: vacuum infiltration

low-temperature treatment

and combination of infiltration and low-temperature. Uniaxial compression tests were carried out on these post-processed sand 3D printed rock-like samples to study their mechanical properties

and the reasons for changes in mechanical properties were analyzed at a microscopic level by scanning electron microscopy. The results indicated that different post-processing methods can change the mechanical properties of the samples

and the combination of infiltration and low temperature can significantly enhance the strength and stiffness of samples

which is related to change in the internal cementation state of samples. The findings of the study can provide new research ideas for future application of 3D printing technology in rock testing.

关键词

Keywords

references

Views

369

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of enzyme-induced calcium carbonate precipitation on mechanical properties and microstructure of 3D printed sandstone-like specimens

A preliminary research on three-dimensional reconstruction and mechanical characteristics of rock mass based on CT scanning and 3D printing technology

Mechanical properties of 3D printed rock samples subjected to high temperature treatment

Deformation and fracturing characteristics of fracture network model and influence of filling based on 3D printing and DIC technologies

Experimental and numerical study of hydraulic properties of three-dimensional rough fracture networks based on 3D printing technology

Related Author

TIAN Wei

JIA Yi-heng

YU Chen

TIAN Wei

PEI Zhi-ru

HAN Nü

WANG Zhen

ZHANG Li

Related Institution

Key Laboratory of Degraded and Unused Land Consolidation Engineering, Ministry of Natural Resources

Faculty of Electric Power Engineering, Kunming University of Science and Technology

School of Energy and Mining Engineering, China University of Mining and Technology(Beijing)

School of Petroleum Engineering, China University of Petroleum (East China)

School of Engineering, Nagasaki University, Nagasaki 8528521

AI问答

⁰