Face stability analysis of the slurry-type shield tunneling considering the dynamic filter cake

JIN Da-long; YUAN Da-jun

doi:10.16285/j.rsm.2021.1703

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Face stability analysis of the slurry-type shield tunneling considering the dynamic filter cake

更新时间：2026-06-25

- Face stability analysis of the slurry-type shield tunneling considering the dynamic filter cake
- Vol. 43, Issue 11, Pages: 2952-2962(2022)
- 作者机构：
  
  1. 北京交通大学隧道与地下工程教育部工程研究中心,北京,100044
  2. 北京交通大学土木建筑工程学院,北京,100044
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2021.1703
  CLC： U455.43
- Online First：29 November 2022，
  
  Published：2022
- 稿件说明：
移动端阅览
JIN Da-long, YUAN Da-jun. Face stability analysis of the slurry-type shield tunneling considering the dynamic filter cake[J]. 2022, 43(11): 2952-2962.
DOI：

JIN Da-long, YUAN Da-jun. Face stability analysis of the slurry-type shield tunneling considering the dynamic filter cake[J]. 2022, 43(11): 2952-2962. DOI： 10.16285/j.rsm.2021.1703.

摘要

泥水盾构工法被广泛应用于高压富水复杂地质环境中修筑隧道，其中开挖面稳定控制是工程成败的关键，在盾构掘进时，由于刀盘不断旋转切削地层，开挖面上的泥膜处于“形成―破坏―再形成”的动态循环过程，泥膜透水性增强，这种动态泥膜作用下开挖面的稳定如何评价有待于进一步探索。对此，对泥水盾构掘进过程中的动态泥膜进行了分类，提出了考虑盾构运动和泥浆渗滤特征的动态泥膜理论。在此基础上，采用空间离散法将泥水压力引入旋转体模型，建立了考虑动态泥膜效应的开挖面稳定力学模型，提出了泥水盾构动态掘进过程中开挖面临界泥浆压力及泥浆支护效率评估方法，研究指出：当盾构在强渗透性地层中掘进时，在尽量提高泥浆成膜率的同时，应注重泥浆黏度调节，充分发挥渗透力支护作用，同时可适当提高盾构掘进速度并降低刀盘转速，有利于开挖面稳定控制。以泥浆成膜率、等效渗透系数为依据给出了泥浆支护效率设计图，研究工作对盾构掘进支护压力控制和泥浆配置有一定的借鉴意义。

Abstract

Slurry shield tunnelling method is widely used in the complex geological environment with high water pressure for tunnel construction. The face stability control is the key for the engineering safety during shield tunnelling. Due to the continuous rotation of the cutter head

the filter cake is in the "formation-destruction-re-formation" dynamic cycle process

resulting in a relative permeable membrane. How to evaluate face stability under this dynamic filter cake need to be further explored. In this paper

the dynamic filter cakes are divided into three types. An analytical approach is developed by coupling the penetration-filtering and shield movement. Based on the pressure transfer mechanism of the bentonite suspension

a new penetration-type model for the evaluation of face stability is developed. It can be found that the slurry viscosity as well as the filter cake ratio should be paid more attention during tunnelling in the high permeable ground. A faster advance rate and a lower rotation speed of the shield machine could improve the face stability. Finally

a design chart of slurry support efficiency is provided

which could give some reference for the control of support pressure and slurry selection in engineering practice.

关键词

Keywords

references

Views

407

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical simulation of minimal support pressure of plane strain tunnel in non-homogeneous clay

Upper bound analysis of plane strain tunnel in nonhomogeneous clays

Soil conditioning influence on face stability of shield tunnel

Numerical research on face movement and collapse of shield tunneling in silt ground

Comparative theoretical and experimental analysis of rock breaking by tunnel boring machine disc cutters

Related Author

ZHOU Wei-xiang

HUANG Mao-song

Lü Xi-lin

SONG Chun-xia

HUANG Mao-song

Lü Xi-lin

HAN Yue-wang

ZHONG Xiao-chun

Related Institution

Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University

Department of Geotechnical Engineering, Tongji University

Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University

College of Civil Engineering, Hohai University

College of Environmental Science and Technology, Hohai University

AI问答

⁰