Study of the calculation of plastic zone around the vertical digging hole for building rectification

XIAO Jun-hua; SUN Jian-ping

doi:10.16285/j.rsm.2020.0422

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Study of the calculation of plastic zone around the vertical digging hole for building rectification

更新时间：2026-06-25

- Study of the calculation of plastic zone around the vertical digging hole for building rectification
- Vol. 41, Issue 12, Pages: 4073-4077(2020)
- 作者机构：
  
  1. 山东建筑大学土木工程学院,山东,济南,250101
  2. 山东建大工程鉴定加固研究院,山东,济南,250014
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2020.0422
  CLC： TU746.3
- Online First：18 January 2021，
  
  Published：2020
- 稿件说明：
移动端阅览
XIAO Jun-hua, SUN Jian-ping. Study of the calculation of plastic zone around the vertical digging hole for building rectification[J]. 2020, 41(12): 4073-4077.
DOI：

XIAO Jun-hua, SUN Jian-ping. Study of the calculation of plastic zone around the vertical digging hole for building rectification[J]. 2020, 41(12): 4073-4077. DOI： 10.16285/j.rsm.2020.0422.

摘要

采用桩筏基础的高层建筑倾斜后，常采用竖向孔掏土进行地应力解除实现纠倾，工程设计与施工依据经验进行，缺乏理论指导。将一定深度处的竖向孔孔周应力重分布问题简化为平面应变问题，采用摩尔?库仑强度条件推导了塑性区半径的解析解。该解析解表明，塑性半径随土体抗剪参数的降低而增大，随掏土孔半径的增大而增大，随地应力的增大而增大。结合解析解的表达式，探讨了存在地下水、注水、抽水、循环掏土扰动等因素对塑性区半径的影响。最后用数值分析方法对该解析解进行模拟验证，表明公式的正确性与适用性。该研究成果对纠倾工程的设计与施工具有积极的指导作用。

Abstract

For inclined high-rise building with pile raft foundation

vertical hole digging is often used to relieve the ground stress to achieve the inclination correction. Due to the lack of theoretical guidance

the engineering design and construction have to rely to a large extent on experience. In this paper

the problem of stress redistribution around a vertical hole at a certain depth is simplified as a plane strain problem

and the analytical solution of the radius of plastic zone is derived by using the Mohr Coulomb strength theory. The analytical solution shows that the plastic radius increases with the decrease of shear parameters

the increase of digging hole radius and the increase of depth. By combining the site rectification phenomenon with the analytical solution formula

the influences of the groundwater

water injection

pumping

cyclic soil digging disturbance on the plastic radius are discussed. Finally

the numerical simulation is used to verify the analytical solution

which shows the validity and applicability of the formula. The research results will provide scientific insight for the design and smart construction of the rectification practice.

关键词

Keywords

references

Views

104

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Coupling mechanism of seepage and heat transfer in rock fracture based on physics-informed neural networks

Influence of construction gap on the force of steel lining in compressed air storage cavern

Stability and failure mode analysis of tunnel face in composite ground with upper sand and lower clay layers

Characterization method for the three-dimensional soil cutting failure surface based on damage energy dissipation

Pullout simulation on fully grouted rock bolts based on residual shear strength

Related Author

WANG Zhi-liang1

XIAO Zhi-huan1

SHEN Lin-fang1

LI Shao-Jun2

ZHANG Gui-min

SUN Wen-qing

ZHU Ze-fan

SU Yong-kang

Related Institution

Faculty of Civil Engineering and Mechanics, Kunming University of Science and Technology

State Key Laboratory of Geomechanics and Geotechnical Engineering Safety, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences

School of Mechanics and Civil Engineering, China University of Mining and Technology

State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering, China University of Mining and Technology

School of Highway, Chang’an University

AI问答

⁰