LUO Gang, ZHANG Hui-ao, MA Guo-tao, et al. Study on sliding tribological characteristics of the sliding plane of a high-speed rockslide: taking the Wangshan-Zhuakousi rockslide as instance[J]. 2020, 41(7): 2441-2452.
DOI:
LUO Gang, ZHANG Hui-ao, MA Guo-tao, et al. Study on sliding tribological characteristics of the sliding plane of a high-speed rockslide: taking the Wangshan-Zhuakousi rockslide as instance[J]. 2020, 41(7): 2441-2452.DOI: 10.16285/j.rsm.2019.1857.
Study on sliding tribological characteristics of the sliding plane of a high-speed rockslide: taking the Wangshan-Zhuakousi rockslide as instance
In order to characterize the transportation mechanism of the high-speed rockslide
it is significant to investigate the tribological characteristics of the sliding surface. However
the investigation of tribological characteristics has not been thoroughly revealed. Taking the Wangshan-Zhuakousi rockslide in Emeishan city of Sichuan province as instance
the engineering geological conditions and the motion characteristics of the rockslide were obtained through field geological survey and video surveillance. Based on the high-speed friction experiments of the rockslide masses (basalt) and the sliding plane (tuff) by the pin and disc worn instrument
the tribological characteristics (dynamic friction coefficient and microscopic wear surface appearance) were analyzed under dry and saturated conditions. The results show that: the dynamic friction coefficient of the sliding plane (the interface between basalt and tuff) is much smaller than that of basalts. Regardless of the dry and saturated conditions
the dynamic friction coefficient of the sliding plane (the interface between basalt and tuff) is negatively correlated with both the frictional velocities and the normal pressures in the experiments. Regardless of the dry and saturated conditions
the dynamic friction coefficient of sliding mass (basalt) is also negatively correlated with the frictional velocities
whereas it is positively correlated with the normal pressure in the experiments. In the high-speed friction process
the dynamic friction coefficient is increased instantly due to the dilative shear failure of the sliding surface. The experimental results can be adopted for explaining the high-speed motion of the hard rockslides containing the weak interlayers. In addition
the findings in this study can provide essential design parameters for disaster prevention and high-speed rockslide mitigation in the tuff and basalt areas.
Starting-elastic-impulsive acceleration mechanism of high-speed rockslide and elastic-impulsive velocity calculation: Taking Jiweishan rockslide in Wulong, Chongqing for example
模拟柱状节理玄武岩试样的失效模式与各向异性特征试验研究
Stochastic statistics and probability distribution estimation of mechanical parameters of basalt
Tribological characteristics of high-speed rolling limestone
Experimental study on rupture evolution and failure characteristics of aphanitic basalt
Related Author
GE Yun-feng
NI Wei-da
LIU Xiao
XIONG Cheng-ren
TANG Hui-ming
ZOU Zong-xing
WANG Zhang-chun
RUAN Huai-ning
Related Institution
Faculty of Engineering, China University of Geosciences
Three Gorges Research Center for Geo-hazards of Ministry of Education, China University of Geosciences
Institute of Geotechnical Research, Hohai University
Department of Geotechnical Engineering, Nanjing Hydraulic Research Institute