Borehole imaging method based on ultrasonic synthetic aperture technology

WANG Jin-chao; TAO Dong-xin; HUANG Yan-qing; WANG Chuan-ying; HAN Zeng-qiang; HU Sheng

doi:10.16285/j.rsm.2019.0022

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Borehole imaging method based on ultrasonic synthetic aperture technology

更新时间：2026-06-25

- Borehole imaging method based on ultrasonic synthetic aperture technology
- Vol. 40, Issue S1, Pages: 557-564(2019)
- 作者机构：
  
  1. 中国科学院武汉岩土力学研究所岩土力学与工程国家重点实验室,湖北,武汉,430071
  2. 浙江华厦工程勘测设计研究院宁波分院，浙江临海,315000
  3. 中国中铁大桥勘测设计院集团有限公司,湖北,武汉,430056
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2019.0022
  CLC： TD326
- Online First：20 August 2019，
  
  Published：2019
- 稿件说明：
移动端阅览
WANG Jin-chao, TAO Dong-xin, HUANG Yan-qing, et al. Borehole imaging method based on ultrasonic synthetic aperture technology[J]. 2019, 40(S1): 557-564.
DOI：

WANG Jin-chao, TAO Dong-xin, HUANG Yan-qing, et al. Borehole imaging method based on ultrasonic synthetic aperture technology[J]. 2019, 40(S1): 557-564. DOI： 10.16285/j.rsm.2019.0022.

摘要

随着地下空间开发的深入，钻孔岩壁上特殊区域的重视程度越来越高，为了克服传统超声波钻孔成像技术分辨率低的不足，提出一种基于超声波合成孔径技术的钻孔成像方法，提高钻孔图像的分辨率和图像质量。采用高分辨率的合成孔径SAFT成像技术综合处理大量的断面扫描回波信号，达到增强反射信号和抑制干扰信号的目的，使对应的岩壁特征区域回波更加突显，在该基础上提取出扫描断面回波信号的声幅和声时参数。综合声幅和声速参数的特征，提出了基于相关性的超声波钻孔图像重建原则，选择合适的成像数据点，在叠加不同深度的探测数据后形成了关注区域更加明显的钻孔重建图像。将该方法应用到了实际工程中，验证了该方法的可行性和准确性。

Abstract

With the development of underground space

more and more attention has been paid to the special areas on borehole wall. In order to overcome the low resolution of traditional ultrasonic borehole imaging technology

a new borehole imaging method based on ultrasonic synthetic aperture technology is proposed to improve the resolution and image quality. Firstly

high resolution synthetic aperture focusing technique(SAFT) is used to synthetically process a large number of cross-section scanning echo signals

so as to enhance the reflection signal and suppress the interference signal

which makes the echo of the corresponding typical area at the rock wall more prominent. Then the sound amplitude and sound time parameters of the scanned cross-section echo signals are extracted. The principle of ultrasonic drilling image reconstruction based on correlation is proposed based on the synthesized characteristics of sound amplitude and sound velocity parameters. After superimposing the detection data of different depths

the borehole reconstruction image with more obvious focus area is formed. Finally

the method is applied in practical engineering

and its feasibility and accuracy has been verified.

关键词

Keywords

references

Views

160

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study of automatically extracting structural plane parameters from borehole images

Visual analysis method of weak structural planes based on multiple frequency ultrasound imaging features

Borehole imaging characteristics and quality evaluation methods of clastic rock slope in Three Gorges Reservoir area

Mechanism of water infiltration affecting ground ice melting in the silty clay layers of the Dema Expressway in the eastern Qinghai-Xizang Plateau

Elasto-viscoplastic bounding surface model for unsaturated time-dependent soils incorporating non-stationary flow rule

Related Author

WU Jian

FENG Shao-kong

LI Hong-jie

ZOU Xian-jian

MA Zhi-min

WANG Chuan-ying

SONG Huan

SUN Qian-cheng

Related Institution

China Three Gorges Corporation

Geophysical Survey and Logging, Chuo Kaihatsu Corp

China Three Gorges University

School of Electronic Information, Wuhan University

Innovation Academy for Precision Measurement Science and Technology, Chinese Academy of Sciences

AI问答

⁰