Volume of fluid method based finite element analysis of fracture grouting

ZHU Min; GONG Xiao-nan; GAO Xiang; LIU Shi-ming; YAN Jia-jia

doi:10.16285/j.rsm.2018.2035

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Volume of fluid method based finite element analysis of fracture grouting

更新时间：2026-06-25

- Volume of fluid method based finite element analysis of fracture grouting
- Vol. 40, Issue 11, Pages: 4523-4532(2019)
- 作者机构：
  
  1. 浙江大学滨海和城市岩土工程研究中心,浙江,杭州,310058
  2. 浙江省城市地下空间开发工程技术研究中心,浙江,杭州,310058
  3. 中国电建集团华东勘测设计研究院有限公司,浙江,杭州,311122
  4. 浙江省智慧轨道交通工程技术研究中心,浙江,杭州,311122
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2018.2035
  CLC： O242
- Online First：01 December 2019，
  
  Published：2019
- 稿件说明：
移动端阅览
ZHU Min, GONG Xiao-nan, GAO Xiang, et al. Volume of fluid method based finite element analysis of fracture grouting[J]. 2019, 40(11): 4523-4532.
DOI：

ZHU Min, GONG Xiao-nan, GAO Xiang, et al. Volume of fluid method based finite element analysis of fracture grouting[J]. 2019, 40(11): 4523-4532. DOI： 10.16285/j.rsm.2018.2035.

摘要

劈裂注浆作为一种有效的土体加固方法，其理论研究落后于工程实践。提出了基于弥散裂缝模型和流体体积法的劈裂注浆有限元分析方法，并通过ABAQUS二次开发编写劈裂注浆有限元程序。数值分析结果能与室内试验较好吻合，验证了有限元算法的合理性。在此基础上研究了注浆孔埋深和注浆流量对劈裂浆脉形状的影响。结果表明，劈裂注浆过程可分为起劈和劈裂发展两个阶段。当劈裂浆脉扩展到模型边界后，继续注浆会引起注浆压力的大幅提高和已有浆脉宽度的增加。随着注浆孔埋深的增加，浆脉分支减少，长度减小，宽度增加，劈裂浆脉形状的主要控制因素从土体参数的随机性变成大小主应力值的差异。注浆量一定的情况下，注浆速率越大，劈裂浆脉长度越短，宽度越大，注浆终压也越大。研究为劈裂注浆的工程应用提供理论支撑。

Abstract

Fracture grouting is an effective method for soil reinforcement

yet the theoretical studies are far behind engineering practice. Using secondary-developed ABAQUS

a finite element model of fracture grouting is proposed based on the smeared crack model and VOF (volume of fluid) method. Results of FEM analysis are in good agreement with the laboratory tests. The effects of grouting depth and injection rate on the grout vein shapes are then investigated. The results show that fracture process can be divided into two stages: fracture initiation and extension. When the grout veins reach model boundary

higher grouting pressure is needed to increase the width of grout veins. With the grouting depth increases

the grout veins have less branches

reducing length and increasing width. The main factors affecting the shape of grout veins change from randomness of soil properties to the difference between major and minor principle stress. For given injection volume

higher injection rate results in shorter and thicker grout veins and higher grouting pressure. The research provides theoretical support for engineering applications of fracture grouting.

关键词

Keywords

references

Views

323

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Analysis of fracture grouting mechanism based on model test

Analysis of raising pipeline by fracture grouting and its application

Experiment study on diffusion characteristics of repeated fracture grouting in dense weak strata

Modelling method of heterogeneous rock material based on level set method and hydraulic fracture propagation features

Hydraulic fracturing characteristics of heterogeneous rock with hard inclusion distributed

Related Author

WANG Qian

LI Meng-tian

ZHANG Wei-jie

LI Shu-cai

ZHANG Xiao

ZHANG Qing-song

LI Peng

LI Bing

Related Institution

Research Center of Geotechnical and Structural Engineering, Shandong University

Tunnel and Underground Engineering Research Center of Ministry of Education, Beijing Jiaotong University

Beijing Urban Engineering Design & Research Institute Co., Ltd.

State Key Laboratory of Tunnel Engineering, School of Qilu Transportation, Shandong University

School of Qilu Transportation, Shandong University

AI问答

⁰