Study of contact cracks based on improved numerical manifold method

YANG Shi-kou; ZHANG Ji-xun; REN Xu-hua

doi:10.16285/j.rsm.2018.0904

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Study of contact cracks based on improved numerical manifold method

更新时间：2026-06-25

- Study of contact cracks based on improved numerical manifold method
- Vol. 40, Issue 5, Pages: 2016-2021(2019)
- 作者机构：
  
  1. 河海大学力学与材料学院
  2. 河海大学水利水电学院
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2018.0904
  CLC： O346.1
- Published：2019
- 稿件说明：
移动端阅览
[1]杨石扣,张继勋,任旭华.基于改进数值流形法的接触裂纹问题研究[J].岩土力学,2019,40(05):2016-2021.

YANG Shi-kou, ZHANG Ji-xun, REN Xu-hua. Study of contact cracks based on improved numerical manifold method[J]. 2019, 40(5): 2016-2021.
[1]杨石扣,张继勋,任旭华.基于改进数值流形法的接触裂纹问题研究[J].岩土力学,2019,40(05):2016-2021. DOI： 10.16285/j.rsm.2018.0904.

YANG Shi-kou, ZHANG Ji-xun, REN Xu-hua. Study of contact cracks based on improved numerical manifold method[J]. 2019, 40(5): 2016-2021. DOI： 10.16285/j.rsm.2018.0904.

摘要

接触裂纹问题在工程结构中较为常见。结合数值流形法在裂纹处理上的优势

分析了压剪荷载作用下的接触裂纹问题

模拟了压剪裂纹渐进扩展过程。为了减少由于裂纹尖端位置不同而产生的误差

对裂纹尖端附近一定范围内的每一个物理覆盖附加奇异覆盖函数项

并根据裂纹尖端位置和单元含奇异物理覆盖的数目进行分区积分。选取一个压剪破坏算例

分析了法向接触力对应力强度因子计算结果的影响

并模拟了其渐进破坏过程。计算结果表明

所提方法在压剪裂纹问题方面的可行性

与未细化和覆盖细化方法得到的结果相比

更能准确地描述裂纹扩展路径。法向接触力对Ⅱ型应力强度因子的贡献为0

对Ⅰ型应力强度因子的影响较大

相对误差随网格密度变化明显

且法向接触力对Ⅰ型应力强度因子的影响要比直接施加内压时的影响大。

Abstract

The problem of contact crack is common in engineering structures. Combining the advantages of numerical manifold method in crack treatment

the contact crack problem under compression and shear loads is analyzed

and the progressive propagation process of compression-shear cracks is simulated. In order to reduce errors caused by different positions of crack tips in one element

the singular cover function term is added to each physical cover near the crack tip in a certain range

and then the partitioned integration is carried out according to the position of crack tip and the number of singular physical covers in each element. A compression-shear failure example is selected to analyze the impact of normal contact force on stress intensity factor

and then the progressive failure process is simulated. The results show that the proposed method for compression-shear crack is feasible. Compared with results obtained from unrefined and refined methods

the proposed method in this paper can describe crack propagation path with much higher accuracy. The normal contact force has no contribution to mode Ⅱ stress intensity factor. However

it has great influence on mode Ⅰ stress intensity factor and the relative error varies with mesh density. Moreover

the effect of normal contact force on mode Ⅰ stress intensity factor is larger than that of inner pressure.

关键词

Keywords

references

Views

191

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Mesh independence of numerical manifold method in treating strong singularity

Study of modification of strain energy density factor theory and rock crack propagation

Study of fracture damage evolution mechanism of compression-shear rock cracks under high seepage pressure

Study on hydraulic fracture of gravity dam using the numerical manifold method

Application of enriched numerical manifold method to hydraulic fracture

Related Author

XU Dong-dong

ZHENG Hong

SHI Ming-ming

ZHANG You-liang

TAN Fei

LIU Tao-ying

CAO Ping

ZHANG Li-feng

Related Institution

State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences

School of Resources and Safety Engineering, Central South University

Hydro China Huadong Engineering Corporation

School of Energy and Safety Engineering, Hunan University of Science and Technology

University of Chinese Academy of Sciences

AI问答

⁰