PENG Yu, DING Xuan-ming, XIAO Yang, et al. Study of particle breakage behaviour of calcareous sand by dyeing tracking and particle image segmentation method[J]. 2019, 40(7): 2663-2672.
DOI:
PENG Yu, DING Xuan-ming, XIAO Yang, et al. Study of particle breakage behaviour of calcareous sand by dyeing tracking and particle image segmentation method[J]. 2019, 40(7): 2663-2672.DOI: 10.16285/j.rsm.2018.0689.
Study of particle breakage behaviour of calcareous sand by dyeing tracking and particle image segmentation method
The main study of this paper focus on the problems that the absolute breakage amount of particles in a certain size range can not be acquired and the hidden breakage amount can not be considered in the particle breakage rate in a sample. Three kinds of calcareous sands
rich in coarse
medium and fine sands respectively
are subjected to the confined compression test. Particles with different sizes are dyed in different colors
and pictures contain the breakage information of particle in all certain particle size range are taken. Then
the Image J software is employed to segment and binarize these pictures and records the area of particles with different colors
which is used to calculated the content of the particles with different colors after failure. Finally
an accumulated particle breakage Ba
which considers the absolute breakage amount of particles in a certain size range
is proposed. Test results show that with the increase of pressure or the concentration of particle distribution
overlapping breakage of samples increases. Among these calcareous sand samples consisting of particles in different sizes
the sand in intermediate particle sizes (0.25-1 mm) is breakable
and edge and corner breakages are the dominant break pattern in the particles with different sizes. The accumulated particle breakage Ba is larger than the relative breakage Br
and has a linear relationship with the logarithmic value of vertical pressure. The study of this paper provides a new method for the research on particle breakage.