Dialectical unity of slope local and global stability analysis methods

YIN Xiao-tao; XUE Hai-bin; TANG Hua; REN Xing-wen; SONG Gang

doi:10.16285/j.rsm.2018.0524

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Dialectical unity of slope local and global stability analysis methods

更新时间：2026-06-25

- Dialectical unity of slope local and global stability analysis methods
- Vol. 39, Issue S1, Pages: 98-104(2018)
- 作者机构：
  
  1. 中国科学院武汉岩土力学研究所岩土力学与工程国家重点试验室,湖北,武汉,430071
  2. 西安理工大学岩土工程研究所,陕西,西安,710048
  3. 西安长庆科技工程有限责任公司,陕西,西安,710021
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2018.0524
  CLC： TU472
- Online First：02 September 2018，
  
  Published：2018
- 稿件说明：
移动端阅览
YIN Xiao-tao, XUE Hai-bin, TANG Hua, et al. Dialectical unity of slope local and global stability analysis methods[J]. 2018, 39(S1): 98-104.
DOI：

YIN Xiao-tao, XUE Hai-bin, TANG Hua, et al. Dialectical unity of slope local and global stability analysis methods[J]. 2018, 39(S1): 98-104. DOI： 10.16285/j.rsm.2018.0524.

摘要

边坡稳定性评价方法有局部和整体两类，两者之间存在差异有其历史的局限性和存在的合理性。以极限平衡法和有限元强度折减法为例，分析了典型整体与局部稳定性评价方法在滑面搜索、平衡条件、安全系数的定义、材料参数和失稳等5个方面存在的异同。利用PFC算例揭示了真实边坡带有强烈空间和时间特征的渐进破坏特性，发现边坡失稳是自然地形的重塑、再造和稳定的过程，也是一个动势能转换和耗散的过程。针对边坡稳定问题及其特点，提出了基于广义软化的边坡稳定矢量和法的理论构架和技术路线，并进行了程序实现，克服了传统强度折减脱离实际材料劣化特征的不足，安全系数求解仅与应力状态相关，假设条件少，可以实现局部与整体稳定评价的辩证统一，可以反映边坡失稳的渐进特性和参数演化的时空效应。与传统极限平衡法(LEM)和强度折减法(SRM)在滑面和安全系数方面的综合对比发现，局部稳定揭示的滑面更稳定，获取的安全系数是全周期的，文中方法所得安全系数比整体方法的结果稍高，差异是整体方法的假设条件造成的。

Abstract

Analysis method of slope stability can be classified into local and global kinds. These different points have their historical rationality and limit. Taking limit equilibrium method and strength reduction method for examples

the difference of typical local and global one such as slip surface

equilibrium condition

definition of safety factor

material parameters and un-stability is studied and summarized. Using a PFC slope fail case presents that real slope un-stability has observably spatiotamporal series and progressive features. Practical slope failure is a process of terrain reconstruction and stabilization and a process of potential and kinetic energy transition and dissipation. Aiming at these

the theoretical framework and technical route of slope stability vector sum method considering generalized softening are established. The relative program is implemented too. Whose reduction has material degradation back-ground. Its safety factor only relates to stress state of the slope. There are few assumed conditions in the method

which can realize dialectical unity of local and global stability and reflects progressive characteristics and spatiotamporal effect of slope un-stability. The safety factor and slip surface obtained by the method proposed compared with results of LEM and SRM

show that slip surface of local one is more stable

safety factor is whole life cycle and is larger than that of global one by 5%. The difference between local and global slope stability analysis method is caused by their assumed conditions.

关键词

Keywords

references

Views

432

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Selection of constitution and distribution model of normal stresses over slip surface of slope

Analysis of slope stability based on modified relationship of intermediate principal stress

Three-dimensional stability analysis of slope with weak interlayer

Study of slope stability under blasting vibration based on distribution of normal stress over slip surface

Search of three-dimensional slip surface for slope based on finite element calculation

Related Author

LU Kun-lin

ZHU Da-yong

YANG Yang

GONG Wen-jun

ZENG Li-feng

SUN Jun-jie

LI Ming-yong

WANG Hao-ran

Related Institution

School of Civil Engineering, Hefei University of Technology

Anhui Key Laboratory of Civil Engineering and Materials, Hefei University of Technology

Department of Civil Engineering, Beihang University

State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology

Lanzhou Institute of Seismology, China Earthquake Administration

AI问答

⁰