LI Shu-cai, CHEN Hong-bin, ZHANG Chong, et al. Research on effect of advanced support in silty clay tunnel[J]. 2017, 38(S2): 287-294.
DOI:
LI Shu-cai, CHEN Hong-bin, ZHANG Chong, et al. Research on effect of advanced support in silty clay tunnel[J]. 2017, 38(S2): 287-294.DOI: 10.16285/j.rsm.2017.S2.040.
Research on effect of advanced support in silty clay tunnel
In order to find out the supporting effect of advanced support in silty clay tunnel
the ground settlement
crown settlement
surrounding rock pressure
concrete shotcrete stress and grid steel frame stress are studied by the methods of field test and numerical simulation with the third-phase project of Harbin Metro Line 1 as the engineering background. The conclusions of the study are as follows: (1) Grout diffusion range is too small and uneven
the improving effect of current grouting capacity for soil is poor; the mechanical parameters of the slurry soil have not been raised too much; and its indexes are no different from those of the ordinary soil mass. (2) Silty clay stratum has a certain resistance to the deformation caused by tunnel excavation; the tunnel deformation can reach stability in a short time whether or not the advanced support exists or not. (3) There are obvious differences in lateral stress distribution of surrounding rock; and the grid steel stress increases rapidly in accordance with the increase of the surrounding rock pressure
illustrating that the time and spatial effects of the advanced support which improve uneven surrounding rock load and delay the release of surrounding rock pressure in the silty clay tunnel is not existent. (4) As the range of plastic zone is 1.5-3.0 m roughly and the small pipe do not go beyond the plastic zone on the radial
the supporting effect of them is actually the compaction effect they have on the surrounding soil
which increases its density but cannot reach the effect of arousing the self-supporting capacity of surrounding rocks. (5) The maximum stress of the grid steel frame is only about 30% of its yield strength and the concrete shotcrete layer maximum stress is only about 13.6% of its axial compressive strength
which means it has a sufficient strength reserve to ensure a greater safety.
Coupling mechanism of seepage and heat transfer in rock fracture based on physics-informed neural networks
Influence of construction gap on the force of steel lining in compressed air storage cavern
Stability and failure mode analysis of tunnel face in composite ground with upper sand and lower clay layers
Characterization method for the three-dimensional soil cutting failure surface based on damage energy dissipation
Pullout simulation on fully grouted rock bolts based on residual shear strength
Related Author
WANG Zhi-liang1
XIAO Zhi-huan1
SHEN Lin-fang1
LI Shao-Jun2
ZHANG Gui-min
SUN Wen-qing
ZHU Ze-fan
SU Yong-kang
Related Institution
Faculty of Civil Engineering and Mechanics, Kunming University of Science and Technology
State Key Laboratory of Geomechanics and Geotechnical Engineering Safety, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences
School of Mechanics and Civil Engineering, China University of Mining and Technology
State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering, China University of Mining and Technology