Optimisation of bolt rib spacing and anchoring force under different conditions of surrounding rock

ZHAO Xiang-zhuo; ZHANG Hong-wei; CAO Chen; ZHANG Ming

doi:10.16285/j.rsm.2017.1415

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Optimisation of bolt rib spacing and anchoring force under different conditions of surrounding rock

更新时间：2026-06-25

- Optimisation of bolt rib spacing and anchoring force under different conditions of surrounding rock
- Vol. 39, Issue 4, Pages: 1263-1270(2018)
- 作者机构：
  
  1. 辽宁工程技术大学矿业学院,辽宁,阜新,123000
  2. 辽宁工程技术大学辽宁省煤炭资源安全开采与洁净利用工程研究中心,辽宁,阜新,123000
  3. 伍伦贡大学土木、采矿与环境学院,新南威尔士,伍伦贡,2522
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2017.1415
  CLC： TP028.8
- Online First：06 June 2018，
  
  Published：2018
- 稿件说明：
移动端阅览
ZHAO Xiang-zhuo, ZHANG Hong-wei, CAO Chen, et al. Optimisation of bolt rib spacing and anchoring force under different conditions of surrounding rock[J]. 2018, 39(4): 1263-1270.
DOI：

ZHAO Xiang-zhuo, ZHANG Hong-wei, CAO Chen, et al. Optimisation of bolt rib spacing and anchoring force under different conditions of surrounding rock[J]. 2018, 39(4): 1263-1270. DOI： 10.16285/j.rsm.2017.1415.

摘要

为研究不同围岩条件下锚杆肋间距与锚固性能的关系

基于厚壁理论

对肋间距分别为12、24、36、48 mm的左旋螺纹钢锚杆锚固试件在套筒壁厚4.5 mm和6.0 mm条件下进行拉拔试验

通过测试拉拔力、拉拔力大于100 kN的位移量、套筒周向应变、耗能值等参数

探讨了不同围岩条件下锚杆肋间距与锚固性能的关系。试验结果表明:在不同的套筒中

即不同围岩条件下

随着肋间距的增加

锚杆拉拔力大于100 kN的位移量、套筒周向应变、拉拔耗能值相应增大;肋间距为24 mm时

锚杆拉拔力最大

相同肋间距的锚杆在围岩强度较大的条件下拉拔力较大;壁厚为4.5 mm的套筒周向应变均大于壁厚为6.0 mm的套筒

即不同围岩条件对锚杆控制其变形能力有重要影响;在不同围岩条件下

增大肋间距均可以提高锚杆的锚固性能。

Abstract

This study investigated the relationship between bolt rib spacing and anchorage performance under different conditions of surrounding rock. Based on the thick-walled cylinder theory

pull-out tests were carried out on sinistral rebar bolt specimens with the spacing of 12

and 48 mm

which were anchored in the steel sleeves with wall thicknesses of 4.5 and 6.0 mm

respectively. Results of the drawing force

the displacement of drawing force more than 100 kN

the circumferential strain of the sleeves and energy dissipation were obtained. Experimental results show that the displacement of drawing force more than 100 kN

the circumferential strain and the energy dissipation value of the sleeve increase with increasing the rib spacing in different sleeves (different surrounding rock conditions)

respectively. The pulling force of anchor rod is found to be the highest when the rib spacing is 24 mm. While with the same rib spacing

the stronger the surrounding rock is

the larger the pulling force is. The circumferential strain of the sleeve with a 4.5 mm thick wall is larger than that of 6.0 mm

which indicates that the effect of surrounding rock is significant on the deformation ability of bolts. Moreover

the anchorage performance can be improved by increasing the rib spacing under different surrounding rock conditions.

关键词

Keywords

references

Views

309

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Discrete element simulation of interface characteristic and frictional properties of triaxial geogrid

Study of influence of joint protuberance on geogrid reinforcement performance by discrete element method

Mesoscopic study of interface properties of geogrid-reinforced soil

Pull-out test of uniaxial geogrid with strengthening ribs

Effect of water content on pull-out behavior of interface between geogrid and compacted expansive soil

Related Author

ZHAO Jian-bin

XIE Ming-xing

CUI Ming-juan

ZHENG Jun-jie

MIAO Chen-xi

ZHAO Jian-bin

XIE Ming-xing

CUI Ming-juan

Related Institution

Key Laboratory of Highway Construction and Maintenance Technology in Loess Region, Shanxi Transportation Research Institute

Institute of Geotechnical and Underground Engineering, Huazhong University of Science and Technology

Shanghai Institute of Geological Survey

Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University

Engineering Management Center, Dahua Group Co., Ltd.

AI问答

⁰