A preliminary research on three-dimensional reconstruction and mechanical characteristics of rock mass based on CT scanning and 3D printing technology

TIAN Wei; PEI Zhi-ru; HAN Nü

doi:10.16285/j.rsm.2017.08.018

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

A preliminary research on three-dimensional reconstruction and mechanical characteristics of rock mass based on CT scanning and 3D printing technology

更新时间：2026-06-25

- A preliminary research on three-dimensional reconstruction and mechanical characteristics of rock mass based on CT scanning and 3D printing technology
- Vol. 38, Issue 8, Pages: 2297-2305(2017)
- 作者机构：
  
  长安大学建筑工程学院,陕西,西安,710061
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2017.08.018
  CLC： TU452
- Online First：05 June 2018，
  
  Published：2017
- 稿件说明：
移动端阅览
TIAN Wei, PEI Zhi-ru, HAN Nü. A preliminary research on three-dimensional reconstruction and mechanical characteristics of rock mass based on CT scanning and 3D printing technology[J]. 2017, 38(8): 2297-2305.
DOI：

TIAN Wei, PEI Zhi-ru, HAN Nü. A preliminary research on three-dimensional reconstruction and mechanical characteristics of rock mass based on CT scanning and 3D printing technology[J]. 2017, 38(8): 2297-2305. DOI： 10.16285/j.rsm.2017.08.018.

摘要

无法直观认识和还原岩石内部结构一直是阻碍岩石力学试验研究的关键问题之一。以天然砂岩为研究对象，运用CT扫描和2种不同的3D打印工艺重构了与天然砂岩试样结构相接近的3D打印试样，并在此基础上通过单轴压缩和巴西劈裂试验对天然砂岩及3D打印试样进行了力学性能测试，对比了两者的强度和变形规律。试验结果表明：通过不同3D打印工艺制作的试样均能够高度还原天然砂岩试样的内部复杂结构。其中，采用3DP打印工艺制作的试样具有与天然砂岩试样更接近的物理力学性能，试验结果的离散性也相对较小。其研究结果可为今后岩石力学研究中材料的替换、室内试验的开展和数值模拟结果的印证提供新的研究途径。

Abstract

Reconstructing the inner structure of rocks has been one of the critical problems in the field of experimental rock mechanics. In this paper

natural sandstone specimens were selected as research objects

and CT scanning and two different kinds of three-dimensional (3D) printing methods were adopted to reconstruct 3D-printed specimens. It turns out that the structures of 3D-printed specimens were in proximity to natural sandstone specimens. Uniaxial compression tests and Brazilian tests were carried out on these two kinds of specimens to obtain mechanical properties. Then the strength and deformation law of natural sandstone specimens and two kinds of 3D-printed specimens were compared. The results indicated that specimens made by different methods of 3D printing technology could highly reconstruct the complex inner structure of natural sandstone specimens. In the meantime

physical and mechanical properties of 3D-printed specimens were closer to natural sandstone specimens

and the dispersion of experimental results was relatively small. Therefore

this study provides a new promising way that can conduct experimental research

produce substitutes for materials and verify numerical simulation results.

关键词

Keywords

references

Views

1246

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of enzyme-induced calcium carbonate precipitation on mechanical properties and microstructure of 3D printed sandstone-like specimens

Mechanical properties of sand 3D printed rock-like samples based on different post-processing methods

Mechanical properties of 3D printed rock samples subjected to high temperature treatment

Deformation and fracturing characteristics of fracture network model and influence of filling based on 3D printing and DIC technologies

Experimental and numerical study of hydraulic properties of three-dimensional rough fracture networks based on 3D printing technology

Related Author

TIAN Wei

JIA Yi-heng

YUN Wei

YU Chen

CHENG Xu

TIAN Wei

WANG Xiao-hui

WANG Zhen

Related Institution

Key Laboratory of Degraded and Unused Land Consolidation Engineering, Ministry of Natural Resources

Faculty of Electric Power Engineering, Kunming University of Science and Technology

School of Energy and Mining Engineering, China University of Mining and Technology(Beijing)

School of Petroleum Engineering, China University of Petroleum (East China)

School of Engineering, Nagasaki University, Nagasaki 8528521

AI问答

⁰