ZHANG Zhi-chao, CHEN Yu-min, LIU Han-long, et al. Multivariate analysis of stress and deformation behavior of micropile-MSE wall[J]. 2017, 38(7): 1911-1918.
ZHANG Zhi-chao, CHEN Yu-min, LIU Han-long, et al. Multivariate analysis of stress and deformation behavior of micropile-MSE wall[J]. 2017, 38(7): 1911-1918.DOI: 10.16285/j.rsm.2017.07.009.
Multivariate analysis of stress and deformation behavior of micropile-MSE wall
Failure mode of mechanically stabilized earth(MSE) wall in slope areas exhibits as the integral sliding of the backfill region along the slope. Particularly
the reduction of backfill strength obviously exacerbates the deformation of the wall. In this study
a novel micropile reinforcement scheme was proposed to investigate this failure mode. Finite element models of MSE wall of the slope before and after reinforcement were established and further validated by scaled model tests. Based on different natural conditions of the slope and the backfill strength
multivariate analysis was performed numerically to compare the stress and deformation behavior of MSE wall before and after micropile reinforcement. The results indicate that the reinforcement of micropiles can effectively prevent the sliding of backfill region along the slope. The displacements of the wall were decreased by 6.25% to 46.9%
according to different natural conditions of backslope. Moreover
the more obvious decrement was found when the backslope friction angle was lower. Based on different backfill strengths
the displacements were reduced by 6% to 56.1%
and the reduction was greater when the backfill strength was lower. In addition
the earth pressure and deformation of backfill soil declined greatly as well. Therefore
the results can provide an important guidance for the application of micropile-MSE wall in the practical engineering of road construction in mountainous areas.
Coupling mechanism of seepage and heat transfer in rock fracture based on physics-informed neural networks
Influence of construction gap on the force of steel lining in compressed air storage cavern
Stability and failure mode analysis of tunnel face in composite ground with upper sand and lower clay layers
Characterization method for the three-dimensional soil cutting failure surface based on damage energy dissipation
Pullout simulation on fully grouted rock bolts based on residual shear strength
Related Author
WANG Zhi-liang1
XIAO Zhi-huan1
SHEN Lin-fang1
LI Shao-Jun2
ZHANG Gui-min
SUN Wen-qing
ZHU Ze-fan
SU Yong-kang
Related Institution
Faculty of Civil Engineering and Mechanics, Kunming University of Science and Technology
State Key Laboratory of Geomechanics and Geotechnical Engineering Safety, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences
School of Mechanics and Civil Engineering, China University of Mining and Technology
State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering, China University of Mining and Technology