Influence of normal stiffness on 3D monotonic and cyclic behaviors 
of a gravel-structure interface

FENG Da-kuo; ZHANG Jian-min

doi:10.16285/j.rsm.2017.0341

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Influence of normal stiffness on 3D monotonic and cyclic behaviors of a gravel-structure interface

更新时间：2026-06-25

- Influence of normal stiffness on 3D monotonic and cyclic behaviors of a gravel-structure interface
- Vol. 39, Issue 11, Pages: 3929-3936(2018)
- 作者机构：
  
  1. 清华大学水沙科学与水利水电工程国家重点实验室,北京,100084
  2. 中国建筑第七工程局有限公司,河南,郑州,450004
  3. 清华大学岩土工程研究所,北京,100084
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2017.0341
  CLC： TU411
- Online First：15 November 2018，
  
  Published：2018
- 稿件说明：
移动端阅览
FENG Da-kuo, ZHANG Jian-min. Influence of normal stiffness on 3D monotonic and cyclic behaviors of a gravel-structure interface[J]. 2018, 39(11): 3929-3936.
DOI：

FENG Da-kuo, ZHANG Jian-min. Influence of normal stiffness on 3D monotonic and cyclic behaviors of a gravel-structure interface[J]. 2018, 39(11): 3929-3936. DOI： 10.16285/j.rsm.2017.0341.

摘要

运用80 t大型三维接触面试验机，对不同法向刚度下粗粒土与结构接触面三维静动力学特性进行了试验研究，重点分析了法向刚度对接触面力学特性的影响规律。法向常刚度条件下，接触面在单调剪切时均先剪缩再剪胀、法向应力先减小后增大；循环剪切时接触面不可逆性剪切体变呈单调增长、可逆性剪切体变峰值逐渐减小后趋于稳定，切向应力峰值不断减小，抗剪强度逐渐减小，主应力比峰值则基本保持不变。法向刚度主要影响剪切体变、可逆性剪切体变、切向应力、主剪应力等接触面力学性能参数的大小；法向刚度越大，单调剪切时法向应力变化越大、切向应力峰值越大、剪缩和剪胀量越小；循环剪切时不可逆性剪切体变增长越慢、最终值越小，抗剪强度减小越快、达到0时对应的循环周次越少。法向刚度对剪切体变、可逆性剪切体变、主剪应力、主应力比等性能参数与切向位移的关系形式及接触面摩擦角基本没有影响。

Abstract

Applied with a new large-scale interface apparatus

the influence of normal stiffness on 3D monotonic and cyclic behavior of the gravel-structure interface was investigated in detail. Under constant normal stiffness condition

the interface contracts first and then dilates

and the normal stress accordingly reduces and then increases during monotonic shearing. The irreversible volumetric change of the interface grows continuously

the normal stress

peak shear stress

shear strength of the interface decreases overall due to cyclic shearing while the peak resultant stress ratio remains invariable despite of shear cycle. It is indicated that the normal stiffness plays a vital role in 3D monotonic and cyclic behavior of the interface. With larger normal stiffness

the normal stress and the peak shear stress increase more during monotonic shearing; the irreversible volumetric change accumulates more slowly and its ultimate value is accordingly smaller. Meanwhile

the shear strength of the interface decreases faster to zero and the corresponding cycle number at which the shear strength becomes zero is smaller. The normal stiffness has a markable impacts on the value of performance parameters of the interface such as the irreversible and reversible volumetric change

shear stress

resultant shear stress

except the friction angle. In addition

good consistency exists in the relationship pattern between volumetric change

reversible volumetric change

resultant shear stress and resultant stress ratio versus tangential displacement

regardless of normal stiffness.

关键词

Keywords

references

Views

300

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Influence of initial static shear stress on cycle mechanical behavior of interface between structure and gravelly soil

Direct shear tests for mechanical characteristics of interface between Qinghai-Tibetan silt and fiberglass reinforced plastics

Experimental study on shearing mechanical characteristics of thawing soil and structure interface under high pressure

Direct shear tests and PFC2D numerical simulation of colluvial mixture

Numerical analysis of grouting-screw pile uplift bearing capacity

Related Author

FENG Da-kuo

WEN Zhi

YU Qi-hao

MA Wei

DONG Sheng-shi

NIU Fu-jun

WANG Da-yan

YANG Zhen

Related Institution

China State Construction Engineering Corporation

State Key Laboratory of Frozen Soil Engineering, Cold and Arid Regions Environmental and Engineering Research Institute, Chinese Academy of Sciences

School of Civil Engineering and Mechanics, Lanzhou University

School of Mechanics and Civil Engineering, China University of Mining and Technology

State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology

AI问答

⁰