Thermal consolidation of saturated silty clay considering overconsolidation effect with different heating-cooling paths

YANG Guang-chang; BAI Bing

doi:10.16285/j.rsm.2017.0219

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Thermal consolidation of saturated silty clay considering overconsolidation effect with different heating-cooling paths

更新时间：2026-06-25

- Thermal consolidation of saturated silty clay considering overconsolidation effect with different heating-cooling paths
- Vol. 39, Issue 1, Pages: 71-77(2018)
- 作者机构：
  
  北京交通大学土木建筑工程学院,北京,100044
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2017.0219
  CLC： TU415
- Online First：06 June 2018，
  
  Published：2018
- 稿件说明：
移动端阅览
YANG Guang-chang, BAI Bing. Thermal consolidation of saturated silty clay considering overconsolidation effect with different heating-cooling paths[J]. 2018, 39(1): 71-77.
DOI：

YANG Guang-chang, BAI Bing. Thermal consolidation of saturated silty clay considering overconsolidation effect with different heating-cooling paths[J]. 2018, 39(1): 71-77. DOI： 10.16285/j.rsm.2017.0219.

摘要

通过室内试验，研究了超固结比OCR对不同温度路径下中空圆柱饱和粉质黏土热固结特性的影响。研究表明，同一升温过程、不同超固结比试样所产生的最大孔压基本相同，但在相同的降温过程中，随着OCR的增大，产生的负孔压的绝对值有增大的趋势；升温或降温过程产生的体应变随着OCR的增大而减小，呈指数形式变化，并且温度幅度越大，这种变化幅度也越大；经过升温-降温过程后的最终体应变也随着OCR的增大而减小；升温或降温到同一温度值，其过程设置的温度等级越多，固结体应变也越大，并且随着OCR的增大，不同等级之间的体应变差值减小，而OCR对不同等级升温-降温后的最终体应变间的差值影响较小。

Abstract

The effects of over consolidation ratio (OCR) on thermal consolidation characteristics of hollow cylindrical saturated silty clay with different heating-cooling paths are discussed by laboratory tests. Given the same thermal loading

pore water pressures of samples with different OCR values caused by heating are almost the same

while the absolute value of negative pore water pressure caused by cooling increases with the increase of OCR value. The consolidation volumetric strain induced by heating or cooling decreases with the increase of OCR value

and the decrease can be described by exponential function. The amplitudes of the change increase with the increase of thermal loading. Besides

after a heating-cooling process circle

the final volumetric strain also decreases as OCR value increases. The volumetric strain is different under different temperature paths. Generally speaking

the more stages during heating or cooling to reach the final temperature

the larger the volumetric strain is. The difference in volumetric strain between different heating or cooling stages to the final temperature decreases with the increase of OCR value

while the OCR value has relatively small influence on the final volumetric strain after a heating-cooling process circle.

关键词

Keywords

references

Views

189

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Centrifuge model tests on vertical bearing capacity of single pile in silty clay

Stress path tests on natural sedimentary silty clay

Influence of long-term partial drainage of shield tunnel on tunnel deformation and surface settlement

Study of characteristics of pore water pressure and strength of overconsolidated saturated marine clay under bidirectional cyclic loadings

Stability of high relative density silt under cyclic principal stress axis rotation

Related Author

LI Yang

ZHANG Ga

YIN Jie

LIU Fu-jiang

LIU Chen

LIU Chun-wei

LIU Yin

ZHANG Dong-mei

Related Institution

State Key Laboratory of Hydrosciences and Engineering, Tsinghua University

Administration of South-to-North Water Transfer Project in Linyi City

Shandong Province Water Conservancy Project Head Company

Faculty of Civil Engineering and Mechanics, Jiangsu University

Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering, Hohai University

AI问答

⁰