Description of discontinuities morphology based on shear behavior

SONG Lei-bo1; JIANG Quan; LI Yuan-hui; YANG Cheng-xiang; RAN Shu-guang; WANG Bai-lin; LIU Ting

doi:10.16285/j.rsm.2017.02.028

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Description of discontinuities morphology based on shear behavior

更新时间：2026-06-25

- Description of discontinuities morphology based on shear behavior
- Vol. 38, Issue 2, Pages: 525-533(2017)
- 作者机构：
  
  1. 东北大学深部金属矿山安全开采教育部重点实验室,辽宁,沈阳,110819
  2. 中国科学院武汉岩土力学研究所岩土力学与工程国家重点实验室,湖北,武汉,430071
  3. 宁波市高等级公路建设指挥部,浙江,宁波,315000
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2017.02.028
  CLC： TU45
- Online First：05 June 2018，
  
  Published：2017
- 稿件说明：
移动端阅览
SONG Lei-bo1, JIANG Quan, LI Yuan-hui, et al. Description of discontinuities morphology based on shear behavior[J]. 2017, 38(2): 525-533.
DOI：

SONG Lei-bo1, JIANG Quan, LI Yuan-hui, et al. Description of discontinuities morphology based on shear behavior[J]. 2017, 38(2): 525-533. DOI： 10.16285/j.rsm.2017.02.028.

摘要

描述岩石结构面形貌特征的一个重要作用就是为了能更好地理解结构面的剪切行为。首先，从结构面剪切具有方向性的特点出发，抓住在剪切方向上对剪切行为起关键作用的结构面形貌特征，提出描述结构面形貌特征的参数抗剪系数SC。该参数描述了在剪切方向上二维形貌的起伏特征、起伏的统计分布特征以及高度特征，并且还可以表征结构面形貌的方向性。同时，在对10条节理粗糙度系数JRC标准曲线的数字化基础上，建立了抗剪系数SC与JRC值之间的拟合关系。基于三维白光扫描技术得到的自然岩石结构面的点云数据，进一步将抗剪系数SC进行了三维化扩展，使其能够较好地描述结构面的三维形貌特征。最后，以某自然岩石结构面为算例，用三维抗剪系数SC3D度量其沿不同分析方向上的形貌特征，结果表明，抗剪系数能很好地表征结构面形貌特征的各向异性。

Abstract

Description of rock morphology is of great significance to better understand the shear behavior of the discontinuities. Firstly

from the shear directional characteristics of the discontinuities

a new index SC (shear coefficient) describing discontinuities morphology is proposed based on some pivotal role on shear behavior of its morphology in the shear direction. The index describes undulation characteristics

statistical distribution of undulation and height characteristics of two-dimensional discontinuities morphology in the shear direction

and can also characterize directionality of the morphology. Moreover

the relationship between SC and JRC (joint roughness coefficient) is established based on 10 digitized JRC standard curves. Then

with the help of point cloud data of rock discontinuities obtained by three-dimensional (3D) white scanner

the shear coefficient SC is extended to 3D to better characterize 3D morphology characteristics of discontinuities. Finally

the three-dimensional shear coefficient (SC3D) is used to quantify morphology of natural rock discontinuities in different directions. It is shown that SC can well represent anisotropic morphology characteristics of discontinuities.

关键词

Keywords

references

Views

575

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Stability of statistical parameters of discontinuities morphology and anisotropy based on different sampling intervals

Fractal characteristics of joint surface morphology of Pengshui shale and anisotropic characterization based on joint roughness coefficient

Evolution of anisotropic mechanical properties and damage model of sandstone under unidirectional freeze-thaw action

Shear behavior of red-bed soft rock-grout interface: effect of grout and rock properties

Study of evolution of sand crushability based on discrete elements method

Related Author

SONG Lei-bo

JIANG Quan

LI Yuan-hui

YANG Chen-xiang

ZHONG Shan

ZHANG Mei-zhu

DONG Jia-bin

LU Yi-fang

Related Institution

State Key Laboratory of Geomechanics and Geotechnical Engineering, Insitute of Rock and Soil Mechanics, Chinese Academy of Sciences

School of Resources and Environment, Henan Polytechnic University

Henan Key Laboratory of Coal Measure Unconventional Resources Accumulation and Exploitation, Henan Polytechnic University

Collaborative Innovation Center of Coal Work Safety and Clean High Efficiency Utilization, Henan Polytechnic University

School of Civil Engineering, Wuhan University

AI问答

⁰