Discrete element simulation of failure mechanism of interface between grouting-screw pile and soil

ZHOU Min-ming; QIAN Jian-gu; HUANG Mao-song; HU Yu-ying

doi:10.16285/j.rsm.2016.S1.077

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Discrete element simulation of failure mechanism of interface between grouting-screw pile and soil

更新时间：2026-06-25

- Discrete element simulation of failure mechanism of interface between grouting-screw pile and soil
- Vol. 37, Issue S1, Pages: 591-595(2016)
- 作者机构：
  
  1. 同济大学地下建筑与工程系,上海,200092
  2. 同济大学岩土及地下工程教育部重点实验室，上海 200092 3. 上海建工集团股份有限公司,上海,200080
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2016.S1.077
  CLC： TU473
- Online First：09 June 2018，
  
  Published：2016
- 稿件说明：
移动端阅览
ZHOU Min-ming, QIAN Jian-gu, HUANG Mao-song, et al. Discrete element simulation of failure mechanism of interface between grouting-screw pile and soil[J]. 2016, 37(S1): 591-595.
DOI：

ZHOU Min-ming, QIAN Jian-gu, HUANG Mao-song, et al. Discrete element simulation of failure mechanism of interface between grouting-screw pile and soil[J]. 2016, 37(S1): 591-595. DOI： 10.16285/j.rsm.2016.S1.077.

摘要

为了揭示新型注浆成型螺纹桩的承载力特性及桩土接触特性，利用二维离散元（DEM）数值分析不同螺纹间距的桩-土接触特性。在既有螺纹桩-土界面的大型直剪试验方案的基础上，建立模拟试验的离散元模型。通过模拟试验的伺服加载机制，实现在接触面法向上施加恒定的压力，然后水平移动接触面底板进行剪切，得到不同螺纹数下剪切位移与剪切应力的关系曲线、孔隙比分布图和力链传力机制。离散元分析表明，存在一个最优的螺纹间距，使接触面的极限抗剪强度最大；螺纹桩桩土接触面周围土体会出现一个拱形的破坏面，该微观机制与室内试验观察一致。

Abstract

In order to find out the bearing capacity and failure mechanism of interface between new grouting-screw pile and soil

the discrete element simulation(DEM) has been used. The DEM model has been built under existing experiment plan of pile-soil interface. According to servo mechanism

the normal pressure on the interface can be unchanged. Then the baseboard is moved at constant velocity

and the relation between shear stress and shear displacement

contact force transport mechanism and the porosity distribution could be obtained when screws of different numbers are adopted. The results show that there is an optimal flutes pitch which can make sure the ultimate shear stress reach to the maximum. And the vaulted failure surface will appear around the pile-soil interface. Moreover

the micro mechanism has a good agreement with indoor experiment.

关键词

Keywords

references

Views

376

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Anisotropic properties of deformation parameters and its mechanism of Wudang group schist

Uniaxial compression failure mechanism of jointed rock mass with cross-cracks

Research on engineering properties of fissures in expansive soil

Study of model test on bearing capacity of screw piles in sand

Shaking table model test on slope dynamic deformation and failure

Related Author

WANG Zhang-qiong

YAN E-chuan

LIU Yi-xue

WANG Zhong-jie

ZHANG Bo

LI Shu-caiP

YANG Xue-ying

WANG Gang

Related Institution

Hubei Provincial Construction Headquarters of Shiyan-Fangxian Expressway

Faculty of Engineering, China University of Geosciences

Department of Engineering Management, Shandong Urban Construction Vocational College

Research Center of Geotechnical and Structural Engineering, Shandong University

State Key Laboratory of Breeding Base for Mining Disaster Prevention and Control, Shandong University of Science and Technology

AI问答

⁰