Model tests on bearing capacity of longitudinal section shaped pile under lateral load

KONG Gang-qiang; PENG Huai-feng; ZHU Xi; GU Hong-wei; ZHOU Li-duo

doi:10.16285/j.rsm.2016.0253

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Model tests on bearing capacity of longitudinal section shaped pile under lateral load

更新时间：2026-06-25

- Model tests on bearing capacity of longitudinal section shaped pile under lateral load
- Vol. 39, Issue 1, Pages: 229-236(2018)
- 作者机构：
  
  1. 河海大学岩土力学与堤坝工程教育部重点实验室,江苏,南京,210098
  2. 河海大学土木与交通学院,江苏,南京,210098
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2016.0253
  CLC： TU473
- Online First：06 June 2018，
  
  Published：2018
- 稿件说明：
移动端阅览
KONG Gang-qiang, PENG Huai-feng, ZHU Xi, et al. Model tests on bearing capacity of longitudinal section shaped pile under lateral load[J]. 2018, 39(1): 229-236.
DOI：

KONG Gang-qiang, PENG Huai-feng, ZHU Xi, et al. Model tests on bearing capacity of longitudinal section shaped pile under lateral load[J]. 2018, 39(1): 229-236. DOI： 10.16285/j.rsm.2016.0253.

摘要

针对纵截面异形桩（扩底桩和楔形桩）、等混凝土用量常规等直径桩的水平向承载特性进行对比模型试验研究，测得不同水平荷载等级下扩底桩和楔形桩的内力、变形、极限承载力和桩侧土压力分布等变化规律特性；初步探讨3种桩型的水平极限承载特性和桩侧土压力分布规律。考虑纵向截面异形效应，基于水平土抗力与水平位移（p-y）曲线法建立纵截面异形桩水平向承载特性理论计算方法，进一步分析弯矩分布规律，并开展影响因素分析。研究结果表明，在当前试验条件下，等混凝土用量楔形桩的水平向承载力比等直径桩的高，砂性土和黏性土中楔形桩水平向极限承载力约分别为等直径桩的1.25倍和1.33倍。相关研究成果可为今后类似土层下水平受荷纵截面异形桩的设计与计算提供参考依据。

Abstract

A series of model tests was conducted to compare the horizontal bearing capacities of longitudinal section shaped pile (belled pile and tapered pile)

and traditional equal-diameter pile

which have identical volume of concrete. The distribution of the internal force and deformation of piles

the ultimate bearing capacity

and lateral soil pressure were measured under different levels of horizontal load. The distribution of the ultimate bearing capacity and lateral soil pressure of three different pile types were comparatively analyzed. A theoretical method was developed to calculate the lateral bearing capacity of longitudinal section shaped pile based on p-y curve method and by considering shape effect. The distribution of pile moments and influencing factors were discussed. The results show that the horizontal bearing capacity of tapered pile is larger than those of belled pile and equal-diameter pile with identical volume of concrete. The ultimate horizontal bearing capacity of tapered pile embedded in sand and clay is nearly 1.25 times and 1.33 times of that of equal-diameter pile. These experimental results are useful for practical engineering and analysis of longitudinal section shaped piles in different applications.

关键词

Keywords

references

Views

353

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Model test and numerical simulation of horizontal bearing capacity and impact factors for foundation piles in slope

Experimental study of performance of geogrid-reinforced retaining wall subjected to load from strip foundation at top surface of wall

Test sduty of horizontal bearing mechanism of pile on canal slope

Model test on installation effect of tapered piles in transparent soils

Visualization comparative model tests on neutral point position of tapered pile and equal section pile

Related Author

CHENG Liu-yong

XU Xi-chang

CHEN Shan-xiong

YU Fei

XIE Jian-ming

LI Jian

XIAO Cheng-zhi

CHEN Qian-qian

Related Institution

State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences

School of Civil Engineering, Hebei University of Technology

Technology and Research Center of Civil Engineering of Hebei Province, Hebei University of Technology

Department of Civil, Environmental, and Architectural Engineering, The University of Kansas

Key Laboratory of Geotechnical Mechanics and Engineering of the Ministry of Water Resources, Yangtze River Scientific Research Institute

AI问答

⁰