Research on combined fracture criterion of rock under compression-shear stress

ZHENG An-xing; LUO Xian-qi

doi:10.16285/j.rsm.2015.07.009

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Research on combined fracture criterion of rock under compression-shear stress

更新时间：2026-06-25

- Research on combined fracture criterion of rock under compression-shear stress
- Vol. 36, Issue 7, Pages: 1892-1898(2015)
- 作者机构：
  
  上海交通大学船舶海洋与建筑工程学院,上海,200240
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2015.07.009
  CLC： TU452
- Online First：13 June 2018，
  
  Published：2015
- 稿件说明：
移动端阅览
ZHENG An-xing, LUO Xian-qi. Research on combined fracture criterion of rock under compression-shear stress[J]. 2015, 36(7): 1892-1898.
DOI：

ZHENG An-xing, LUO Xian-qi. Research on combined fracture criterion of rock under compression-shear stress[J]. 2015, 36(7): 1892-1898. DOI： 10.16285/j.rsm.2015.07.009.

摘要

考虑岩石闭合裂纹壁面间存在的摩擦力对裂纹尖端应力场的影响，应用最大周向应力理论得到压剪复合裂纹的断裂角。在此基础上，依据岩石裂纹尖端双向受力时的破坏特征，结合最大周向应力准则与修正的格里菲斯（Griffith）强度理论，建立了考虑摩擦效应的闭合裂纹失稳扩展的岩石压剪断裂判据。研究结果表明：断裂角受裂纹和荷载方向的夹角、裂纹壁面之间的摩擦系数、侧压力系数的影响；当压剪裂纹的断裂角是某个定值时，纯II型裂纹的断裂韧度与纯I型裂纹的断裂韧度的比值只与岩石裂纹表面的摩擦系数取值有关，而与其他岩石力学参数无关。此研究成果可为压剪应力作用下裂隙岩体的失稳破坏提供参考。

Abstract

By considering the effect of friction between the crack surfaces on the crack-tip stress field

the fracture angle value of the compression-shear combined crack is deduced by using the maximum circumferential stress criterion. According to the failure characteristics of the crack tip of rock subjected to biaxial stresses

a compression-shear combined fracture criterion is proposed by combining the maximum circumferential stress criterion with the modified Griffith strength theory. The frictional effect of the closed crack propagation is also considered in the criterion. The calculation results show that the fracture angle is influenced by the angle between the crack and the loading orientation

the friction coefficient of the crack surfaces and the lateral pressure coefficient. When the fracture angle of the compression-shear combined crack is one specific value

the ratio of the fracture toughness of the pure mode-II crack to that of pure mode-I crack is only influenced by the friction coefficient of the crack surfaces. This study is essential for the research on the failure models of fractured rock mass under the combined compression-shear stress.

关键词

Keywords

references

Views

786

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Rockburst criterion for deep-buried tunnels based on rock integrity failure criterion

Effect of enzyme-induced calcium carbonate precipitation on mechanical properties and microstructure of 3D printed sandstone-like specimens

Discussion on key issues of TBM construction for long and deep tunnels

Experimental validation of modified Maksimovic peak shear strength criterion for rock fractures

Study of thermo-mechano-damage coupling behavior of surrounding rock of deep tunnel

Related Author

WEI Shi-yan

GUO Jian-qiang

SU Lei

LI Yu

TIAN Wei

JIA Yi-heng

YUN Wei

YU Chen

Related Institution

School of Civil Engineering, Guizhou University

School of Civil Engineering, Chang’an University

Key Laboratory of Degraded and Unused Land Consolidation Engineering, Ministry of Natural Resources

State Key Laboratory of Shield Machine and Boring Technology, China Railway Tunnel Group Co., Ltd.

China Railway Tunnel Group Co., Ltd.

AI问答

⁰