An equivalent numerical method for evaluating the reinforcing effectiveness of grouted bolts

CHEN Dong-fang; FENG Xia-ting; XU Ding-ping; JIANG Quan; LIU Guo-feng; JIAN Chong-lin

doi:10.16285/j.rsm.2015.04.038

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

An equivalent numerical method for evaluating the reinforcing effectiveness of grouted bolts

更新时间：2026-06-25

- An equivalent numerical method for evaluating the reinforcing effectiveness of grouted bolts
- Vol. 36, Issue 4, Pages: 1195-1204(2015)
- 作者机构：
  
  1. 东北大学深部金属矿山安全开采教育部重点实验室,辽宁,沈阳,110819
  2. 中国科学院武汉岩土力学研究所岩土力学与工程国家重点实验室,湖北,武汉,430071
- 作者简介：
- 基金信息：
- DOI：10.16285/j.rsm.2015.04.038
  CLC： TU443
- Online First：13 June 2018，
  
  Published：2015
- 稿件说明：
移动端阅览
CHEN Dong-fang, FENG Xia-ting, XU Ding-ping, et al. An equivalent numerical method for evaluating the reinforcing effectiveness of grouted bolts[J]. 2015, 36(4): 1195-1204.
DOI：

CHEN Dong-fang, FENG Xia-ting, XU Ding-ping, et al. An equivalent numerical method for evaluating the reinforcing effectiveness of grouted bolts[J]. 2015, 36(4): 1195-1204. DOI： 10.16285/j.rsm.2015.04.038.

摘要

针对常规数值模拟计算无法有效地反映锚杆对围岩的加固效果的缺陷，结合岩体变形在锚杆中产生的支护压力计算公式，提出了一种简单、有效的砂浆锚杆加固等效数值模拟方法。该方法首先在有锚杆支护隧道开挖的计算结果中提取每根锚杆的最大轴力；然后根据该轴力值按锚杆支护压力公式计算其所产生的等效均布力；最后将该均布力施加到相同计算工况下无锚杆支护的围岩表面进行模拟计算。将该方法应用于锦屏二级水电站地下厂房枢纽洞室及乌东德水电站4#导流洞0+ 550 m断面的开挖与支护计算，通过与现场实测数据对比，结果表明，该方法能较好地模拟锚杆支护对围岩的加固效果，其模拟结果可为隧洞的施工与支护设计提供可靠的参考依据。

Abstract

Because conventional numerical methods fail to evaluate the effectiveness of grouted bolts in reinforcing the surrounding rockmass

a simple and effective equivalent numerical method

with combination of a formulation for the bolt supporting pressure induced by rockmass deformation

is proposed for this purpose. In this method

the maximum axial force of each bolt is first determined by numerically simulating the bolt-supporting tunnel excavation. The obtained maximum axial force is then used to calculate the equivalent force distributing along the rock bolt by using the formulation of the bolt supporting pressure. Finally

the excavation process without bolt supporting is simulated by applying the equivalent distributing force to the surrounding rockmass surface. This method is applied to calculate the excavation and support of the underground powerhouse at Jinping Ⅱ hydropower station and the diversion tunnel #4 (section 0+550 m) at Wudongde hydropower station. By comparing the calculation results with the field measured data

it is found that the proposed method can well address the effectiveness of grouted bolts in reinforcing the surrounding rock

and the simulation results can provide reference for tunnel construction and support design.

关键词

Keywords

references

Views

916

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Coupling mechanism of seepage and heat transfer in rock fracture based on physics-informed neural networks

Influence of construction gap on the force of steel lining in compressed air storage cavern

Stability and failure mode analysis of tunnel face in composite ground with upper sand and lower clay layers

Characterization method for the three-dimensional soil cutting failure surface based on damage energy dissipation

Pullout simulation on fully grouted rock bolts based on residual shear strength

Related Author

WANG Zhi-liang1

XIAO Zhi-huan1

SHEN Lin-fang1

LI Shao-Jun2

ZHANG Gui-min

SUN Wen-qing

ZHU Ze-fan

SU Yong-kang

Related Institution

Faculty of Civil Engineering and Mechanics, Kunming University of Science and Technology

State Key Laboratory of Geomechanics and Geotechnical Engineering Safety, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences

School of Mechanics and Civil Engineering, China University of Mining and Technology

State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering, China University of Mining and Technology

School of Highway, Chang’an University

AI问答

⁰