高玉超,楚威,苏凌宇,姜传金,谢远,仝毅恒.内壁结构对气体中心式同轴离心喷嘴喷雾特性影响[J].航空动力学报,2024(05).

潘业俊,刘灿旭,刘红,尹洪超.船用低速柴油机喷嘴内流及初次破碎机理研究[J].内燃机学报,2022(05).

赵乾鹏,杨金虎,刘存喜,刘富强,穆勇,胡春艳,徐纲.多级旋流空气雾化喷嘴高空气动雾化场的数值研究[J].航空动力学报,2021(12).

S.M.A.Najafi,P.Mikaniki,H.Ghassemi.Numerical simulation of heavy fuel oil atomization using a pulsed pressure-swirl injector[J].Chinese Journal of Chemical Engineering,2021(04).

汪鹏,李静,王欣,刘恒三,范斌,甘萍,郭瑞峰,葛学元,王淼辉.Close-coupled nozzle atomization integral simulation and powder preparation using vacuum induction gas atomization technology[J].Chinese Physics B,2021(02).

王雷,方斌,王光彩.基于大涡模拟的离心式喷嘴雾化过程研究[J].推进技术,2021(08).

王思奇,杨海青.航空重油发动机气助雾化喷嘴雾化机理仿真[J].内燃机学报,2018(02).

王玲玲.大涡模拟理论及其应用综述[J].河海大学学报(自然科学版),2004(03).

聂弘毅.旋流喷嘴射流雾化过程的数值模拟[D].哈尔滨工程大学,2020(05).

成立航空股份有限公司.燃气轮机燃烧室及燃油喷嘴设计[M].国防工业出版社,2021.

侯凌云, 侯晓春, 编著.喷嘴技术手册[M].中国石化出版社,2007.

甘晓华著.航空燃气轮机燃油喷嘴技术[M].国防工业出版社,2006.

Wu Hao,Zhang Fujun,Zhang Zhenyu.Fundamental spray characteristics of air-assisted injection system using aviation kerosene[J].Fuel,2021.

aff > .Multiscale simulation of atomization process and droplet particles diffusion of pressure-swirl nozzle[J].Powder Technology,2020.

Cunxi Liu,Fuqiang Liu,Jinhu Yang,Yong Mu,Chunyan Hu,Gang Xu.Experimental investigations of spray generated by a pressure swirl atomizer[J].Journal of the Energy Institute,2018.

Mingrui Wei,Yongqiang Gao,Fuwu Yan,Longfei Chen,Liuyang Feng,Guangze Li,Cuiqi Zhang.Experimental study of cavitation formation and primary breakup for a biodiesel surrogate fuel (methyl butanoate) using transparent nozzle[J].Fuel,2017.

Tao Zhang,Bo Dong,Xiaohong Chen,Zhonghua Qiu,Rui Jiang,Weizhong Li.Spray characteristics of pressure-swirl nozzles at different nozzle diameters[J].Applied Thermal Engineering,2017.

Matouš Zaremba,Lukas Weiß,Milan Malý,Michael Wensing,Jan Jedelský,Miroslav Jícha.Low-pressure twin-fluid atomization: Effect of mixing process on spray formation[J].International Journal of Multiphase Flow,2017.

D. Sivakumar,S.K. Vankeswaram,R. Sakthikumar,B.N. Raghunandan,J.T.C. Hu,A.K. Sinha.An experimental study on jatropha-derived alternative aviation fuel sprays from simplex swirl atomizer[J].Fuel,2016.

Y. S. Shim,G. M. Choi,D. J. Kim.NUMERICAL MODELING OF HOLLOW-CONE FUEL ATOMIZATION, VAPORIZATION AND WALL IMPINGEMENT PROCESSES UNDER HIGH AMBIENT TEMPERATURES[J].International Journal of Automotive Technology,2008.

F. Payri,V. Bermúdez,R. Payri,F.J. Salvador.The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles[J].Fuel,2003.

Hirt C.W,Nichols B.D.Volume of fluid (VOF) method for the dynamics of free boundaries[J].Journal of Computational Physics,1981(1).