In order to understand the characteristics of the winding heat exchanger
the influence of the winding tube on the fluid flow in the winding tube heat exchanger under different operating conditions was studied by establishing the geometric model of the round tube winding tube heat exchanger
using Fluent simulation numerical simulation software to simulate its in-tube flow
and using origin software to process the data of the in-tube simulation results under each operating condition.The results show that: the average error of the calculated results of the RNG k-ε turbulence model is 5.8%
which is basically consistent with the trend of the experimental value; the influence of the tube inlet flow rate on the shell outlet temperature is smaller than the influence of the tube outlet flow rate on the shell outlet temperature
and the distribution of the shell temperature becomes more uniform with the increase of the tube flow rate. The analysis of the PEC index
a comprehensive evaluation index of the tube process
shows that the analysis of the PEC index shows that the increase of the tube flow rate will cause the corresponding increase of the pressure drop in the tube process
while the change of the friction coefficient is the opposite
and the change amplitude of both tends to level off with the increase of the tube process flow rate
and the heat exchange effect is strengthened significantly.
Numerical investigation on gas flow heat transfer and pressure drop in the shell side of spiral-wound heat exchangers[J]. TANG QiXiong;CHEN GaoFei;YANG ZhiQiang;SHEN Jun;GONG MaoQiong.Science China(Technological Sciences),2018(04)
Generalized air-side friction and heat transfer correlations for wavy-fin compact heat exchangers[J]. Naef A.A. Qasem;Syed M. Zubair.International Journal of Refrigeration,2018
Effects of spacing bars on the performance of spiral-wound heat exchanger and the fitting of empirical correlations[J]. Simin Wang;Guanping Jian;Xin Tong;Jian Wen;Jiyuan Tu.Applied Thermal Engineering,2018
Experimental analysis of heat transfer enhancement in shell and helical tube heat exchangers[J]. N. Jamshidi;M. Farhadi;D.D. Ganji;K. Sedighi.Applied Thermal Engineering,2013(1-2)
Fluid Flow and Heat Transfer Characteristics in Helical Tubes Cooperating with Spiral Corrugation[J]. Ya-xia Li;Jian-hua Wu;Hang Wang;Li-ping Kou;Xiao-hang Tian.Energy Procedia,2012(PA)