According to the hazards of excessive hydrogen leakage from generators

the phenomenon of hydrogen leakage from generators occurred shortly after the normal operation of the 210 MW unit of a certain factory was started after the overhaul. After investigation

it was judged that the conductive screw of the inner ring deviated from the center of the hole

resulting in seal cushion pressure. Offset

gas escape

lead to conductive screw seal poor

through this analysis

attention is paid to some of the hidden dangers that are easily overlooked in the overhaul

seal "dead point"

and require that you should not ignore the installation process of these points because of the pursuit of progress. Nine preventive measures were put forward from the aspects of generator installation

overhaul and operation

and corresponding preventive measures were put forward according to the reasons and treatment process to ensure the safety and stability of generator operation.