CUI Chuanzhi, YAN Dawei, YAO Tongyu, et al. Prediction method of migration law and gas channeling time of CO2 flooding front: A case study of G89-1 Block in Shengli Oilfield[J]. Petroleum Reservoir Evaluation and Development, 2022, (5): 741-747+763.
DOI:
CUI Chuanzhi, YAN Dawei, YAO Tongyu, et al. Prediction method of migration law and gas channeling time of CO2 flooding front: A case study of G89-1 Block in Shengli Oilfield[J]. Petroleum Reservoir Evaluation and Development, 2022, (5): 741-747+763. DOI: 10.13809/j.cnki.cn32-1825/te.2022.05.005.
Prediction method of migration law and gas channeling time of CO2 flooding front: A case study of G89-1 Block in Shengli Oilfield
gas channeling time prediction is of great significance for CO
2
gas channeling prevention and enhanced oil recovery. Current studies rarely involve quantitative characterization of the gas channeling time. According to the parameters of the target block reservoir
the crude oil viscosity
reservoir permeability
gas injection rate and injection-production well spacing and other factors impact on the moving rule of the CO
2
drive front is analyzed by the numerical simulation method
then t
he characterization formula of gas flow time and gas flow influence coefficient considering multiple factors is established
and the accuracy of the formula is verified by comparing with the field practice. The results show that under the condition of constant pressure production
the sweep efficiency decreases with the increase of crude oil viscosity. When the crude oil viscosity is greater than 3 mPa·s
the increase of gas emergence time slows down. When the reservoir permeability increases
the seepage resistance decreases
the displacement front moves faster
and the oil well breaks out earlier. When the gas injection velocity increases
the leading edge movement speed increases and the gas appearance time advances. When the gas injection velocity is 2 500 m
3
/d
the sweep efficiency is the minimum. When the injection-production well spacing increases
the moving speed of gas front slows down
and the gas emergence time of oil well prolongs. When the injection-production well spacing is larger than 250 m