壁厚对T91钢里氏硬度与布氏硬度转换关系的影响

doi:10.13500/j.dlkcsj.issn1671-9913.2025.03.012

English Version Reader LoginJournal Login

您当前的位置：

首页 >

文章列表页 >

壁厚对T91钢里氏硬度与布氏硬度转换关系的影响

更新时间：2025-10-22

- 壁厚对T91钢里氏硬度与布氏硬度转换关系的影响
- Electric Power Survey Vol. 205, Issue 3, Pages: 70-75(2025)
- 作者机构：
  
  1. 安徽津利能源科技发展有限责任公司
  2. 中国能建工程研究院相控阵检测技术应用研究所
  3. 安徽省特种设备协会
  4. 淮南市泉鑫气瓶检验有限公司
- 作者简介：
- 基金信息：
- DOI：10.13500/j.dlkcsj.issn1671-9913.2025.03.012
  CLC： TG142.1;TM621.2
- Published：2025
- 稿件说明：
移动端阅览
[J]. Electric power survey, 2025, 205(3): 70-75.
DOI：

[J]. Electric power survey, 2025, 205(3): 70-75. DOI： 10.13500/j.dlkcsj.issn1671-9913.2025.03.012.

摘要

针对火电厂锅炉管道安全检验中的不同壁厚T91钢小径管，采用里氏硬度计和布氏硬度计分别对其母材和焊缝进行硬度测试。试验结果表明，母材的布氏硬度直读值与实测值之间的误差随壁厚的增大而减小；焊缝的布氏硬度直读值与实测值之间的误差随壁厚的增大呈现先增后减并趋于稳定的趋势。基于回归分析，建立了不同壁厚T91钢小径管母材及焊缝里氏硬度与布氏硬度新的换算关系，其布氏硬度计算值与实测值之间的绝对误差在0 HB～6 HB之间，研究成果能够为火电厂锅炉小管道强度评定提供依据。

Abstract

The hardness of base material and welding of T91 steel small-diameter pipe with different wall thicknesses were tested by leeb hardness tester and brinell hardness tester

respectively.The results show that the error between the direct reading HBHLD and the measured HBW of base material decreases with the increase of wall thickness.The error between the direct reading HBHLD and the measured HBW of weld initially increases and then decreases

eventually stabilizing with the increase of wall thickness.Based on the regression analysis

a new conversion relationship between the leeb hardness and brinell hardness for base material and weld of T91 steel small-diameter pipe is established.The absolute error between the calculated HBW and the measured HBW is within the range of 0 to 6 HB.The research results can provide a basis for the strength assessment of boiler small pipelines in thermal power plant.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

AI问答

⁰