Mei YANG, Yunlong ZHOU, Jinfu YANG, et al. Optimization of 700℃ Ultra-supercritical Single Reheat Power Generation System[J]. Power Generation Technology, 2021, 42(4): 509-516.
DOI:
Mei YANG, Yunlong ZHOU, Jinfu YANG, et al. Optimization of 700℃ Ultra-supercritical Single Reheat Power Generation System[J]. Power Generation Technology, 2021, 42(4): 509-516. DOI: 10.12096/j.2096-4528.pgt.21046.
Optimization of 700℃ Ultra-supercritical Single Reheat Power Generation System
The superheat degree of steam extraction is high in the ultra-supercritical single reheat unit. It results in largely irreversible loss and poor system perfection. The thermodynamic performance of the MAST CYCLE thermodynamic system was analyzed
which can effectively reduce the superheat of regenerative extraction steam. However
the system is relatively complex. The optimization system of single reheat with 4-stage external coolers is the best scheme of system integration
and the power supply efficiency reaches 49.58%. The waste heat of the system was used. The calculation results show that the power supply efficiency of the system reaches 50.07%
which provides a more effective way for the optimization design of 700℃ ultra-supercritical unit system.
LI H Y, ZHAO S, LIU F, et al. Analysis on world energy supply&demand outlook in 2040: based on BP world energy prospect (2019 edition)[J]. Natural Gas and Oil, 2019, 37(6): 1-8.
YANG H C, LIN F S, XIE X S, et al. R&D progress of 700℃ power generation technology and alloy 617 in Europe[J]. Power Equipment, 2012, 26(5): 355-359.
WEITZEL P S. Steam generator for advanced ultra supercritical power plants 700C to 760C[C]//ASME Power Conference Collocated with JSME ICOPE. July 12-14, 2011, Denver, Colorado, USA, 2011: 281-291.
WANG X X, WU Y H, HOU D N, et al. Calculation and analysis of extraction steam parameters of the 700℃ ultra-supercritical units with double-reheat cycle[J]. Turbine Technology, 2018, 60(5): 368-374.
CAI X Y, ZHANG Y P, LI Y, et al. Design and exergy analysis on thermodynamic system of a 700℃ ultra supercritical coal-fired power generating set[J]. Journal of Chinese Society of Power Engineering, 2012, 32(12): 971-978.
YANG J F, ZHANG Z X, HAN D J, et al. New supercritical parameter coal-fired power generation system structure design technology[J]. Power Generation Technology, 2019, 40(6): 555-563.
WANG D, LI H Y, WANG C N, et al. Thermodynamic analysis of coal-fired power plant based on the feedwater heater drainage-air preheating system[J]. Applied Thermal Engineering, 2021, 185: 116420.
LIN X L, LI Q L, WANG L K, et al. Thermo-economic analysis of typical thermal systems and corresponding novel system for a 1000MW double reheat ultra supercritical thermal power plant[J]. Energy, 2020, 201: 117560.
YANG M, ZHOU Y L, WANG D, et al. Thermodynamic cycle analysis and optimization to improve efficiency in a 700℃ ultra-supercritical double reheat system[J]. Journal of Thermal Analysis and Calorimetry, 2020, 141: 83-94.
HU H W,DENG C G. Research on thermal system with double-deaerator[J]. Southern Energy Construction, 2020, 7(4): 98-101.
XU G, ZHOU L Y, ZHOU S F, et al. Optimum superheat utilization of extraction steam in double reheat ultra-supercritical power plants[J]. Applied Energy, 2015, 160: 863-872.
YANG Y. Energy loss analysis and optimization on an ultra supercritical 1000MW unit thermal system using echelon cycle[J]. Thermal Power Generation, 2015, 44(8): 74-77.
DUAN L Q, SUN Q, WANG Z. Performance comparison of thermal energy utilization schemes of the extraction superheat degree for a double reheat coal-fired power plant[J]. Journal of Engineering Thermophysics, 2019, 40(12): 2757-2762.
SHUI Y H, LIU Q, ZHANG L, et al. Parameter optimization of a regenerative system for a 650℃ ultra-supercritical steam turbine[J]. Journal of Engineering Thermophysics, 2020, 41(1): 89-94.
YANG H, YU Y, FAN S W, et al. Application and analysis of echelon cycle in ultra supercritical 1000MW unit[J]. Thermal Power Generation, 2019, 48(12): 129-133.