Lifeng ZHANG, Yu MIAO. Study of Probe Distribution for Furnace Acoustic Tomographic Temperature Measurement[J]. Power Generation Technology, 2021, 42(3): 329-335.
DOI:
Lifeng ZHANG, Yu MIAO. Study of Probe Distribution for Furnace Acoustic Tomographic Temperature Measurement[J]. Power Generation Technology, 2021, 42(3): 329-335. DOI: 10.12096/j.2096-4528.pgt.20050.
Study of Probe Distribution for Furnace Acoustic Tomographic Temperature Measurement
The two/three-dimensional distribution image of furnace temperature can be obtained by furnace acoustic tomographic temperature measurement system. The distribution of ultrasonic probes will directly affect its imaging accuracy. Four-side and four-corner distribution of 8
12 and 16 ultrasonic probes were studied
respectively. Tikhonov regularization algorithm was adopted to obtain the temperature distribution under coarse mesh
and then the local weighted regression method was used to predict the temperature distribution after mesh refinement. Typical temperature field distributions reconstruction was carried out for the 6 probe distributions
and the root mean square error and correlation coefficient were analyzed. The results show that the highest accuracy can be obtained using 16 four-side distribution probes.
关键词
Keywords
references
LIU X R, BANSAL R C. Integrating multi-objective optimization with computational fluid dynamics to optimize boiler combustion process of a coal fired power plant[J]. Applied Energy, 2014, 130: 658-699.
LI C Z, SHAO F Q, KAN Z. Application in acoustic pyrometer system based on generalized cepstrum correlation algorithm[J]. Acta Metrological Sinica, 2013, 34(1): 22-26.
LIU S, LIU S, REN T. Acoustic tomography reconstruction method for the temperature distribution measurement[J]. IEEE Transactions on Instrumentation and Measurement, 2017, 66(8): 1936-1945.
HOLSTEIN P, RAABE A, MULLER R, et al. Acoustic tomography on the basis of travel-time measurement[J]. Measurement Science and Technology, 2004, 15(7): 1420-1428.
杨柳. 基于环形阵列的超声层析检测方法[D]. 北京: 北京理工大学, 2015.
YANG L. Ultrasonic tomography detection method based on ring array[D]. Beijing: Beijing Institute of Technology, 2015.
KONG Q, JIANG G S, LIU Y C, et al. Numerical and experimental study on temperature field reconstruction based on acoustic tomography[J]. Applied Thermal Engineering, 2020, 170: 256-267.
BARTH M, RAABE A. Acoustic tomographic imaging of temperature and flow fields in air[J]. Measurement Science and Technology, 2011, 22(3): 351-360.
WANG S H, YAN H, LI S. Sensor layout design of acoustic computer tomography[J]. China Science Paper, 2014, 9(4): 413-416.
王善辉. 声学层析成像反问题求解及温度场重建算法研究[D]. 沈阳: 沈阳工业大学, 2014.
WANG S H. Inverse problem solving of acoustic tomography and reconstruction algorithm of temperature field[D]. Shenyang: Shenyang University of Technology, 2014.
LIU Y. Comparative research on the reconstruction algorithms for acoustic tomography of temperature field[J]. Modern Information Technology, 2018, 2(12): 146-149.
WANG S H, YAN H, LI S.Design for transceiver array of temperature in stored grain monitored by acoustic CT[J]. Journal of Shenyang University of Technology, 2014, 36(5): 561-566.
RUI X J, QING Y X. Two-dimensional temperature field distribution reconstruction based on least square method and radial basis function approximation[J]. Mathematical Problems in Engineering, 2017: 162: 1-7.
李良梁. 影响声学法测温准确度因素的研究[D]. 沈阳: 东北大学, 2017.
LI L L. Study on factors affecting the accuracy of temperature measurement by acoustic method[D]. Shenyang: Northeastern University, 2017.
李芝兰. 基于声层析成像的温度场重建技术研究[D]. 沈阳: 沈阳工业大学, 2007.
LI Z L. Research on temperature field reconstruction based on acoustic tomography[D]. Shenyang: Shenyang University of Technology, 2007.
WANG R, AN L S, SHEN G Q, et al. Three-dimensional temperature field reconstruction with acoustics based on regularized SVD algorithm[J]. Chinese Journal of Computational Physics, 2015, 32(2): 195-201.
CHEN D Y, LI L T, HU H T. Image reconstruction algorithm based on iterated Tikhonov regularization for electrical capacitance tomography[J]. Journal of Harbin University of Science and Technology, 2009, 14(2): 1-3.
LIU X, LIU S. Research on temperature distribution reconstruction of a boiler based on acoustic tomography[J]. Journal of Chinese Society of Power Engineering, 2017, 37(7): 525-532.
WANG R. Acoustic measurement of three dimensional temperature field in furnace and its application in combustion optimization[D]. Beijing: North China Electric Power University, 2015.
ZHOU X Z, DONG C L, ZHAO C P, et al. Temperature-field reconstruction algorithm based on reflected sigmoidal radial basis function and QR decomposition[J]. Applied Thermal Engineering, 2020, 171: 148-157.
Analysis of Influence of Flue Gas Recirculation on Thermodynamic Performance and Economic Efficiency of 125 MW Supercritical CO2 Coal-Fired Power Generation Unit
A Two-Stage Acoustic Tomography Method for Temperature Distribution Reconstruction
Reconstruction of Temperature Distribution in Acoustic Tomography Based on Robust Regularized Extreme Learning Machine
Optimization Method of Flow Field for Alleviating Clogging of Mist Eliminator in Desulfurization Tower
Application Status and Existing Problem Analysis of the Natural Draft Cooling Towers With Flue Gas Injection Technology in Thermal Power Plants
Related Author
XIANG Jun
HU Song
JIANG Long
XU Kai
CHEN Jing
LIU Hui
ZHU Meng
WANG Can
Related Institution
State Key Laboratory of Coal Combustion (Huazhong University of Science and Technology)
CHN Energy Group New Energy Technology Research Institute Co., Ltd., Chaoyang District
GD Power Development Co., Ltd., Chaoyang District
School of Energy and Power Engineering, Changsha University of Science and Technology
Department of Environmental Science and Engineering, North China Electric Power University