
1. 广东工业大学 材料与能源学院,广东,广州,510006
2. 全球能源互联网欧洲研究院,柏林,德国,10623
Online First:25 May 2023,
Published:2023
移动端阅览
程子杰, 陈观生, 刘良德, 毛凌波, 罗超鸿, 许佳孟, 谢鹏, 金露, 谯耕. 铝硅合金相变储热装置保温结构实验研究[J]. 广东工业大学学报, 2023, 40(3): 46-51.
Cheng Zi-jie, Chen Guan-sheng, Liu Liang-de, et al. An Experimental Study of Thermal Insulation Structure of Al-Si Alloy Phase Change Heat Storage Device[J]. 2023, 40(3): 46-51.
程子杰, 陈观生, 刘良德, 毛凌波, 罗超鸿, 许佳孟, 谢鹏, 金露, 谯耕. 铝硅合金相变储热装置保温结构实验研究[J]. 广东工业大学学报, 2023, 40(3): 46-51. DOI: 10.12052/gdutxb.210137.
Cheng Zi-jie, Chen Guan-sheng, Liu Liang-de, et al. An Experimental Study of Thermal Insulation Structure of Al-Si Alloy Phase Change Heat Storage Device[J]. 2023, 40(3): 46-51. DOI: 10.12052/gdutxb.210137.
保温结构直接影响储热装置的储热性能。针对铝硅合金相变储热装置的保温问题,本文提出了4种不同的保温结构,测试了不同保温结构下储热装置的外壳温度、耗散功率及其储热效率并进行对比,得出最佳保温结构。研究结果表明,在储热体温度为600 ℃时,玻璃棉、普通气凝胶、复合气凝胶及真空夹层复合气凝胶4种保温结构的外壳温度分别为91,54,51,41 ℃,耗散功率分别为589,364,325,151 W,实测储热效率分别为0.64,0.85,0.88,0.94,真空夹层复合气凝胶的保温性能最佳。
The heat storage performance of heat storage device is directly affected by its’ thermal insulation structure. The application of Al-Si alloy in phase change energy storage is limited by the heat loss caused by its high working temperature. Aiming at the thermal insulation problem of high temperature phase change heat storage device
four different insulation structures such as glass wool
aerogel
composite aerogel and vacuum sandwich composite aerogel
used in the Aluminum-silicon alloy phase change heat storage device with the working temperature as high as 600 ℃
are put forward. A series of heat storage
thermal insulation and thermal release experiments are carried out
the thermal insulation performance compared including the shell temperature
the dissipated power and the thermal efficiency
and the influence of thermal insulation materials and vacuum interlayer on thermal insulation performance analyzed and studied. The results show that when the heat storage temperature is 600 ℃
the shell temperatures of glass wool
aerogel
composite aerogel and vacuum sandwich composite aerogel are
respectively
91 ℃
54 ℃
51 ℃ and 41 ℃
the dissipated power is 589 W
364 W
325 W and 151 W
and the thermal efficiency is 0.64
0.85
0.88 and 0.94
respectively. The thermal insulation performance of vacuum sandwich composite aerogel is the best.
ZHAO Y X, ZHANG X L, HUA W S. Review of preparation technologies of organic composite phase change materials in energy storage[J]. Journal of Molecular Liquids, 2021, 336: 115923. DOI 10.1016/j.molliq.2021.115923
NAZIR H, BATOOL M, OSORIO F, et al. Recent developments in phase change materials for energy storage applications: a review[J]. International Journal of Heat and Mass Transfer, 2019, 129: 491-523
SAHA S, RUSLAN A, MORSHED A, et al . Global prospects and challenges of latent heat thermal energy storage: a review [J ] . Clean Technologies and Environmental Policy, 2021, 23(6): 1-29.
ZHAO J, ZHOU Z C, PU Y L, et al . Design and application of electric heating high temperature phase change energy storage device [J ] . Agricultural Engineering, 2016, 6(6): 98-109.
VERDIER D, FERRIRE A, FALCOZ Q, et al. Experimentation of a high temperature thermal energy storage prototype using phase change materials for the thermal protection of a pressurized air solar receiver[J]. Energy Procedia, 2014, 49: 1044-1053.
WATERSON M. The characteristics of electricity storage, renewables and markets[J]. Energy Policy, 2017, 104: 466-473.
MURAT K, KHAMID M. Solar energy storage using phase change materials[J]. Renewable and Sustainable Energy Reviews, 2007, 11: 1913-1965.
ZHAO B C, CHENG M S, LIU C, et al. Cyclic thermal characterization of a molten-salt packed-bed thermal energy storage for concentrating solar power[J]. Applied Energy, 2017, 195: 761-773.
刘超. 用于余热回收的相变蓄热换热装置的实验研究[D]. 北京: 北京建筑大学, 2020.
CUI H T, PENG P Y, JIANG J Z. The status and prospect on Al-Si alloy and heat storage unit as phase change material for thermal energy storage [J]. Materials Review, 2014, 28(23): 72-75.
LI H P, ZHANG R Y, MAO L B, et al . A tentative study of the heat storage properties of Al-Si alloy [J ] . Journal of Guangdong University of Technology, 2009, 26(4): 37-41.
LI L, LIU X, WANG G, et al. Research progress of ultrafine alumina fiber prepared by sol-gel method: a review[J]. Chemical Engineering Journal, 2020, 421: 127744. DOI 10.1016/j.cej.2020.127744.
HSISSOU R, SEGHIRI R, BENZEKRI Z, et al. Polymer composite materials: a comprehensive review[J]. Composite Structures, 2021, 262: 113640. DOI 10.1016/j.compstruct.2021.113640.
PETRIČEVIĆ R, GLORA M, MÖGINGER A, et al . Skin formation on RF aerogel she ets [J ] . Journal of Non-Crystalline Solids, 2001, 285(1/2/3): 272-276.
KORKMAZ S, KARIPER A. Graphene and graphene oxide based aerogels: synthesis, characteristics and supercapacitor applications[J]. The Journal of Energy Storage, 2019, 27(8) : 101038. DOI 10.1016/j.est.2019.101038.
GAO X R, XING Z, LI Z, et al . A review on recent advances in carbon aerogels: their preparation and use in alkali-metal ion batteries [J ] . New Carbon Materials, 2020, 35(5): 486-507.
SHANG L, LYU Y, HAN W. Microstructure and thermal insulation property of silica composite aerogel[J]. Materials, 2019, 12(6) : 993. DOI 10.3390/ma12060993.
LATIFI F, TALEBI Z, KHALILI H , et al. Effect of processing parameters and pore structure of nanostructured silica aerogel on the physical properties of aerogel blankets[J]. Materials Research Express, 2018, 5(5) : 055020. DOI 10.1088/2053-1591/aac1e2.
ZHANG X, LI N, HU Z, et al. Direct fabrication of poly(p-phenylene terephthalamide) aerogel and its composites with great thermal insulation and infrared stealth[J]. Chemical Engineering Journal, 2020, 388: 124310. DOI 10.1016/j.cej.2020.124310
张双喜, 杨莉萍, 郭铁明, 等. 超细玻璃棉导热系数的研究[J]. 新型建筑材料, 2005(5) : 50-52.
LI S D, ZHANG R Y, MAO L B, et al . Experimental study on heat transfer performance of Al-Si alloys used in solar thermal power generation [J ] . Huazhong Univ of Sci Tech (Natural Science Edition), 2009, 37(8): 73-76.
0
Views
0
下载量
0
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802024621