high-speed automated CNC feedback closed-loop systems. In order to enhance the reliability of high-speed measurement
a linear encoder with
I-Q
balanced photoelectric coding and decoding method is proposed. The main grating and the indicating grating are placed in parallel
and the difference in grating constant forms a moiré fringe. Each photodiode of the photodetection unit is an independent detection channel
which is distributed according to the relative phase position of the moiré fringe at a fixed spatial frequency
and is amplified by an independent DC operational am
plifier circuit designed according to the
I-Q
balanced encoding and decoding equation.
I-Q
balanced encoding and decoding equation conditions are respectively sent to the 2-way adder
and the output of the adder is the standard and general 2-way
I-Q
quadrature signal
which is in line with the standard for automation equipment. This method comprehensively enhances the automatic numerical control closed-loop system's anti-grating surface pollution
anti-photodiode distribution position error and anti-low-frequency vibration ability
and is an efficient
reliable
and practical grating technology.
关键词
Keywords
references
DUAN G R. High-order system approaches: I. fully-actuated systems and parametric designs [J]. Acta Automatica Sinica, 2020, 46(7): 1333-1345.
LI M, NA W B, LIU T T, et al . Fault diagnosis method based on data driven for closed-loop system’s sensor [J ] . Instrumentation Technology and Sensors, 2020(3): 89-94.
LUO Y. Design of displacement measurement system based on grating ruler [J]. Electronic Measurement Technology, 2020, 43(7): 18-22.
HENG Y, WU J C, YANG Z J. A Fixed-point design of control algorithm based on FPGA [J]. Journal of Guangdong University of Technology, 2020, 37(3): 55-58.
XUE J F, ZHAO P, LIANG W L. Analysis and processing of steel grating ruler signal based on the FPGA [J]. Journal of North China Institute of Aerospace Industry, 2018, 28(5): 6-8.
WANG N H, ZHAO W R, CHEN J H, et al . A novel LED plane light source [J ] . Journal of Guangdong University of Technology, 2017, 34(1): 65-70, 77.
ZENG B, HONG G N. Research on model of indoor visible light communication system with novel LED arrangement pattern [J]. Journal of Guangdong University of Technology, 2017, 34(1): 71-77.
YANG L G, LIU F, RAN J J, et al . Measurement method of axicon cone angle based on Moire fringes of non-diffracting beam [J ] . Applied Optics, 2020, 41(3): 559-564.
LI H M, ZHANG P, DENG M, et al . Thermally induced comprehensive error modeling and compensation for gantry machine tools with grating scale in large structure machining [J ] . Int J Adv Manuf Technol, 2020, 107: 1367-1376.
REN D X, LI B. Research on the accuracy evaluation and calibration method of linear scale [J]. Modular Machine Tool and Automatic Processing Technology, 2020(6): 54-56.
LI D J, WANG J C, WANG J, et al . Influence of grating parameters on the image quality of Moire fringes animation [J ] . Journal of Xi'an Technological University, 2020, 40(4): 373-377.
KUANG J P, YANG Z J, SUN H, et al . Design of absolute grating data acquisition system based on BISS protocol [J ] . Instrument Technology and Sensors, 2020(7): 52-56.
ZHANG M, TONG S F, TENG Y J. Research on acquisition technology and scanning strategy for laser communication system [J]. Laser Journal, 2019, 40(10): 139-142.
PARK J, CHOI H, LIM G, et al . Development of a wide-width raster scanning optical system for high-resolution ultraviolet laser direct micro-patterning [J ] . Optics and Lasers in Engineering, 2020: 134.
LI P, YANG S S, DING Z H, et al . Research progress in Fourier domain optical coherence tomography [J ] . Chinese Laser, 2018, 45(2): 153-163.
MA Z Y, QI X D, LI X T, et al . New measuring method of diffraction efficiency for concave grating based on Fourier optics principle [J ] . Spectroscopy and Spectroscopy Analysis, 2017, 37(4): 1279-1285.
MEI J H. Evaluation of the uncertainty of the indication error in the verification of testers for dial gauges by grating micrometers [J]. Measurement and Testing Technology, 2020, 47(8): 110-112.