Luo Jun-wu, Li Dong-mei, Liang Shuai, et al. A Research on Numerical Simulation of Droplet Generation in Crossing Microchannels[J]. 2020, 37(5): 68-74.
Luo Jun-wu, Li Dong-mei, Liang Shuai, et al. A Research on Numerical Simulation of Droplet Generation in Crossing Microchannels[J]. 2020, 37(5): 68-74.DOI: 10.12052/gdutxb.200005.
A Research on Numerical Simulation of Droplet Generation in Crossing Microchannels
Based on the fluid volume fraction (VOF) model of Fluent software
the droplet generation process in crossing microchannel was investigated by three-dimensional numerical simulation study
and the influences of continuous phase viscosity
dispersed phase viscosity
two-phase interfacial tension and wall contact angle on droplet generation were researched respectively
providing reference for practical applications. The simulation results showed that the droplet size decreased and the generation frequency increased with the increasing flow velocity of continuous phase. When the continuous phase viscosity was increased
the droplet size would decrease and the generation frequency change was opposite. If the dispersed phase viscosity exceeded the continuous phase viscosity
the jet flow phenomenon would occur and the droplets could not be generated. With the increase of the interfacial tension coefficient of two phases
the droplet size would increase
and the formation frequency would decrease. Increasing wall contact angle is beneficial to droplet generation
and when the two-phase flow rate was 0.01 m/s and 0.02 m/s
the contact angle should be set to 150° and 120° respectively to generate droplets normally.
关键词
Keywords
references
GONG Y, HU J, GAO B, et al . Advances in real-time detection of cardiovascular diseases [J ] . Science in China: Technical Science, 2016, 46(11): 1116-1134.
LIN Y Y, WU J B. High throughput material synthesis, characterization and testing platform based on microfluidic technology [J]. Chinese Journal of Nature, 2017, 39(2): 103-114.
WU J, HUANG L H, WANG Y H, et al . Application of microfluidic chip electrophoresis in food safety and environmental pollution detection [J ] . Journal of Analytical Testing, 2015, 34(3): 283-288.
GAO K X, FAN Y Q, JIN Z M, et al . Application of microfluidic chip in enhanced oil recovery [J ] . Fault Block Oil and Gas Field, 2018, 25(2): 269-272.
DONG L, HUO D Q, ZHOU J, et al . Application progress of microfluidic chip in food safety analysis [J ] . Journal of Analytical Testing, 2015, 34(4): 483-487.
ZHAO C X, MILLER E, COOPER-WHITE J J, et al . Effects of fluid-fluid interfacial elasticity on droplet formation in microfluidic devices [J ] . Aiche Journal, 2011, 57(7): 1669-1677.
TUCKERMAN D B, PEASE R. High-performance heat sinking for VLSI [J]. IEEE Electron Device Letters, 1981, 2(5): 126-129.
林炳承. 微纳流控芯片实验室[M]. 北京: 科学出版社, 2013.
CHEN B, GUO F, LI G J, et al . Three-dimensional simulation of bubble formation through a microchannel t-junction [J ] . Chemical Engineering Technology, 2013, 36(12): 1-15.
RAJ R, MATHUR N, BUWA V V, et al . Numerical simulations of liquid-liquid flows in microchannels [J ] . Industrial Engineering Chemistry Research, 2010, 49(21): 10606-10614.
SOMASEKHARA G S, ARNAB A. CFD analysis of microfluidic droplet formation in non–newtonian liquid [J]. Chemical Engineering Journal, 2017, 330: 245-261.
WANG W M, MA Y P, CHEN B. Numerical simulation of droplet formation in crossing micro-channels [J]. Journal of Chemical Engineering, 2015, 66(5): 1633-1641.
YANG L, ZHOU W, WANG X H, et al . Microdroplet formation mechanism based on flow focusing structure [J ] . Micro-electronic Technology, 2015, 52(9): 576-580.
CHEN M R, QIAN J Y, LI X J, et al . Numerical analysis of droplet formation at unsteady dispersed phase velocity in crossing microchannels [J ] . Journal of Chemical Engineering of University of China, 2008, 32(3): 522-528.
吴梁玉. 双乳液的制备及其流体动力学行为研究[D]. 南京: 东南大学, 2016.
吴平. 液滴微流控的实验应用和理论研究[D]. 合肥: 中国科学技术大学, 2014.
ZHONG Y C, TAN X Q, YANG Y M. Discussion on several Issues in microfluid mechanism [J]. Journal of Guangdong University of Technology, 2001, 18(3): 46-48.