Influence of Grain Size and Orientation of Electrical Silicon Steel on Work Hardening in the Disc Slitting

Wang Can-ming; Yan Qiu-sheng; Lu Jia-bin; Qiu Xuan-feng; Zhang Xiao-wei

doi:10.12052/gdutxb.150134

English Version Journal Login

您当前的位置：

首页 >

文章列表页 >

Influence of Grain Size and Orientation of Electrical Silicon Steel on Work Hardening in the Disc Slitting

更新时间：2026-05-27

- Influence of Grain Size and Orientation of Electrical Silicon Steel on Work Hardening in the Disc Slitting
- Vol. 34, Issue 1, Pages: 55-59(2017)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：10.12052/gdutxb.150134
  CLC： TP142.1
- Online First：09 January 2017，
  
  Published：2017
- 稿件说明：
移动端阅览
王灿明, 阎秋生, 路家斌, 邱炫锋, 张晓伟. 电工硅钢晶粒尺寸和取向对圆盘剪分切断面硬化的影响[J]. 广东工业大学学报, 2017, 34(1): 55-59.

Wang Can-ming, Yan Qiu-sheng, Lu Jia-bin, et al. Influence of Grain Size and Orientation of Electrical Silicon Steel on Work Hardening in the Disc Slitting[J]. 2017, 34(1): 55-59.
王灿明, 阎秋生, 路家斌, 邱炫锋, 张晓伟. 电工硅钢晶粒尺寸和取向对圆盘剪分切断面硬化的影响[J]. 广东工业大学学报, 2017, 34(1): 55-59. DOI： 10.12052/gdutxb.150134.

Wang Can-ming, Yan Qiu-sheng, Lu Jia-bin, et al. Influence of Grain Size and Orientation of Electrical Silicon Steel on Work Hardening in the Disc Slitting[J]. 2017, 34(1): 55-59. DOI： 10.12052/gdutxb.150134.

摘要

针对不同晶粒尺寸和取向的电工硅钢进行圆盘剪分切加工试验，通过金相组织观察和显微硬度测试分析了分切断面组织形貌变化及加工硬化行为.金相观察发现，分切加工前后金相组织差异较大，晶粒尺寸越小变形越大，晶粒尺寸较大时容易产生穿晶断裂，并伴随有明显的孪晶组织.电工硅钢的晶粒尺寸和取向对加工硬化影响很大，在晶粒尺寸相近时，无取向硅钢的加工硬化程度明显大于取向硅钢，晶粒取向相同的材料，晶粒尺寸越大，硬度变化越明显.分切过程中的加工硬化程度与材料变形状态也直接相关，变形越激烈加工硬化越大.无取向硅钢内部晶粒取向由杂乱无章变得有序，大大提高了材料抵抗塑性变形的能力，硅钢晶粒较小时变形机制由位错滑移主导，晶粒较大时主要发生孪晶形变.

Abstract

Silicon steel sheets with different grain size and orientation are selected to conduct the disc slitting experiment

and the slitting surface morphology and work hardening behavior are studied by analyzing microstructure morphology and micro-hardness. The difference of metallographic structure is great before and after slitting: silicon steel with smaller grain size has larger deformation

while silicon steel with larger grain size is easy to generate the transgranular fracture along with obvious twin structure. The grain size and orientation of silicon steel have a great influence on work hardening. When the grain size is close

the work hardening ability of the non-oriented silicon steel is bigger than that of the grain-oriented silicon steel. When grain orientation of silicon steel is the same

the larger the grain size

the bigger the changing of hardness. The degree of work hardening is directly related to the material deformation in the disc slitting. The fiercer the deformation

the larger the work hardening. Grain orientation of non-oriented silicon steel becomes orderly

which greatly improves the ability to resist plastic deformation. Deformation mechanism of fine granular material is dominated by dislocation slip and the twin deformation mainly occurs in large granular silicon steel.

关键词

Keywords

references

叶明德. 金属板材精密裁切100问[M]. 北京:冶金工业出版社, 2010:1-2.

何忠治, 赵宇, 罗海文. 电工钢[M]. 北京:冶金工业出版社, 2012:26-27.

孙述利, 郭东城, 刘江, 等. 形变对无取向硅钢50W470组织和力学性能的影响[J]. 特殊钢, 2005, 26(5):14-15. SUN S L, GUO D C, LIU J, et al. Effect of deformation on structure and mechanical properties of non-orientation silicon steel 50W470[J]. Special Steel, 2005, 26(5):14-15.

王黎. 负间隙精密冲裁加工硬化与微观组织研究[D]. 郑州:中原工学院机电学院, 2014.

李硕本, 金淼, 彭加耕. 关于板材加工硬化性能评定方法的探讨[J]. 塑性工程学报, 2001, 8(2):59-62. LI S B, JIN M, PENG J G. A method for evaluating the property of work-hardening of sheet metal[J]. Journal of Plasticity Engineering, 2001, 8(2):59-62.

刘海军, 朱定一, 胡真明, 等. 晶粒尺寸对Fe-20Mn-3Cu-1.3C合金钢加工硬化行为的影响[J]. 材料热处理学报, 2013, 34(4):85-89. LIU H J, ZHU D Y, HU Z M, et al. Influence of grain size on work hardening behavior of the Fe-20Mn-3Cu-1.3C steel[J]. Transactions of Materials and Heat Treatment, 2013, 34(4):85-89.

UEJI R, TSUCHIDA N, TERADA D, et al. Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure[J]. Scripta Materialia, 2008, 59(9):963-966.

KLUSEMANN B, SVENDSEN B, VEHOFF H. Modeling and simulation of deformation behavior, orientation gradient development and heterogeneous hardening in thin sheets with coarse texture[J]. International Journal of Plasticity, 2013, 50(1):109-126.

宋仁伯, 项建英, 侯东坡, 等. 316L不锈钢热加工硬化行为及机制[J]. 金属学报, 2001, 46(1):57-61. SONG R B, XIANG J Y, HOU D P, et al. Behavior and mechanism of hot work-hardening for 316L stainless steel[J]. Acta Metallurgica Sinica, 2001, 46(1):57-61.

阎秋生, 赖志民, 路家斌, 等. 金属板材无毛刺精密分切新工艺分切断面形貌特征研究[J]. 塑性工程学报, 2013, 20(2):20-14. YAN Q S, LAI Z M, LU J B, et al. Study of section morphology characteristics in precision slitting technology with burr-free for sheet metal[J]. Journal of Plasticity Engineering, 2013, 20(2):20-14.

中国国家标准化管理委员会. 金属平均晶粒度:GB/T6394-2002[S]. 北京:中国标准出版社, 2002.

毛卫民, 杨平. 电工钢的材料学原理[M]. 北京:高等教育出版社, 2013:41-43.

张正贵, 王大鹏. 无取向硅钢的织构与磁性[M]. 北京:冶金工业出版社, 2012:12-13.

毛卫民. 金属材料的晶体学织构与各向异性[M]. 北京:科学出版社, 2002:5-6.

YU Q, SHAN Z W, LI J, et al. Strong crystal size effect on deformation twinning[J]. Nature, 2010, 463(7279):335-338.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

A Study of Power Quality Regulation Strategies of Energy Storage Converters

Modeling of 3D NAND Memory Cells with Taper Angle and Programming Strategy Optimization

Multi-Scale Contrastive Embedding Enhanced Adaptive Intrusion Detection Model

Robust Design for Artificial Noise-assisted UAV Terahertz Secure Communication

Bimodal Iterative Cross-attention Fusion Ensemble Framework

Related Author

No data

Related Institution

No data

AI问答

⁰