To improve the behavior of flows in the runner-headcover gap

this paper describes a novel throttling device installed in the pressure equalizing pipe of a pump-turbine unit

focusing on its effects on flow regime and air admission in the gap. We conduct numerical simulations of the runner-head cover gap

using the CFD method

the SST k-ω turbulence model

and the Volume of Fluid (VOF) multiphase flow model. And

in a case study of the Meizhou pumped storage station

throttling orifices with different diameters (relative diameters d/D = 0.238

0.298

0.357

0.476) are examined and compared against the case of no installation. Results show a smaller throttling orifice size induces vortices and backflows in the equalizing pipe. The size has a significant influence on the gap leakage flow rate and the axial force on the lower wall

and a considerable effect on the air admission performance; The flow rate

under the condition of d/D ≥ 0.357

is lowered effectively with little impact on the wall force. At d/D = 0.476

peak values occur in the total gas volume fraction and the fraction in the outer cavity of the gap

indicating the best air admission effect under this orifice condition. For the study case

we recommend the optimal size of d/D = 0.476 based on a comprehensive consideration of the gap flow and air admission performance. Our findings lay a basis for optimizing the structural design of the unit’s equalizing pipe and improving the units safe and stable operation.