Low-Temperature Co-Firing and Synergistic Performance Optimisation of Ba(Zr0.2Ti0.8)O3 Ceramics Achieved by Doping With Trace Amounts of BaO–B2O3–SiO2 Glass
|更新时间:2026-09-24
|
Low-Temperature Co-Firing and Synergistic Performance Optimisation of Ba(Zr0.2Ti0.8)O3 Ceramics Achieved by Doping With Trace Amounts of BaO–B2O3–SiO2 Glass
Electrical Materials and ApplicationsVol. 3, Issue 1, (2026)
作者机构:
1. School of Microelectronics, Shenzhen University of Information Technology,Guangdong,Shenzhen,China
2. Guangdong Provincial Research Center on Smart Materials and Energy Conversion Devices, Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, School of Materials and Energy, Guangdong University of Technology,Guangzhou,China
Xiongwei Lin, Mingrui Zhao, Dan Liu, et al. Low-Temperature Co-Firing and Synergistic Performance Optimisation of Ba(Zr0.2Ti0.8)O3 Ceramics Achieved by Doping With Trace Amounts of BaO–B2O3–SiO2 Glass[J]. Electrical Materials and Applications, 2026, 3(1).
DOI:
Xiongwei Lin, Mingrui Zhao, Dan Liu, et al. Low-Temperature Co-Firing and Synergistic Performance Optimisation of Ba(Zr0.2Ti0.8)O3 Ceramics Achieved by Doping With Trace Amounts of BaO–B2O3–SiO2 Glass[J]. Electrical Materials and Applications, 2026, 3(1).DOI: 10.1049/ema3.70035.
Low-Temperature Co-Firing and Synergistic Performance Optimisation of Ba(Zr0.2Ti0.8)O3 Ceramics Achieved by Doping With Trace Amounts of BaO–B2O3–SiO2 Glass
摘要
Ferroelectric (Ba
Zr)TiO3 (BZT) glass-ceramics doped with varying BaO–B2O3–SiO2 glass contents (0–0.15 wt.%) were synthesised via solid-state reaction. It was found that the introduction of the glass additive significantly reduced the sintering temperature of the pure perovskite BZT phase (1180°C) compared to conventional BZT ceramics
while simultaneously increasing the relative density to over 96%. This phenomenon is primarily attributed to the liquid phase formed by the glass additive at lower temperatures
which enhances particle wetting and inhibits grain boundary migration. Although dielectric constant decreased progressively with increasing glass content
the sample doped with 0.1 wt.% glass retained favourable dielectric characteristics at the paraelectric state. This study demonstrates a viable strategy for optimising key performance parameters low-temperature sintering
low loss
high breakdown strength and high-frequency stability exhibiting competitive performance relative to lead-free ferroelectric ceramics in low-temperature co-fired multilayer ceramic capacitors (MLCCs).
Abstract
Ferroelectric (Ba
Zr)TiO3 (BZT) glass-ceramics doped with varying BaO–B2O3–SiO2 glass contents (0–0.15 wt.%) were synthesised via solid-state reaction. It was found that the introduction of the glass additive significantly reduced the sintering temperature of the pure perovskite BZT phase (1180°C) compared to conventional BZT ceramics
while simultaneously increasing the relative density to over 96%. This phenomenon is primarily attributed to the liquid phase formed by the glass additive at lower temperatures
which enhances particle wetting and inhibits grain boundary migration. Although dielectric constant decreased progressively with increasing glass content
the sample doped with 0.1 wt.% glass retained favourable dielectric characteristics at the paraelectric state. This study demonstrates a viable strategy for optimising key performance parameters low-temperature sintering
low loss
high breakdown strength and high-frequency stability exhibiting competitive performance relative to lead-free ferroelectric ceramics in low-temperature co-fired multilayer ceramic capacitors (MLCCs).